Allnic OTL/OCL Phono vs Allnic DHT

never heard the sound of OTL phono amps. 

@joeycastillo nearly all phono sections are OTL; OTL stands for 'Output TransformerLess'.

Since we have been making preamps with direct-coupled outputs (so OCL and OTL) for decades now, we had considered doing a phono stage as a stand-alone but kept running into the issue of doing the direct coupled output.

That requires an additional tube and a servo circuit. We patented a method of doing this balanced; when its done single-ended you usually have to have some kind of timer or protection circuit to be active until the output has warmed up and stabilized properly. David Berning made a very interesting preamp using this technique about 40 year ago called the TF-10. 

The tricky bit is making sure the servo does not affect the sound of the unit, for example if the opamp for the servo gets changed out for another. The design should be immune to that sort of thing.  

$48K is a bargain compared to the SS  Vitus MP-P201@64K

AND you get the tube magic that SS SOTA cant replicate.  

https://jaguaraudio.com/product/mp-p201-mk-iii-phono-preamplifier-by-vitus-audio/

Might as well drop another couple grand for vintage Euro glass for the Allnic too, just cuz.

Ralph, As phono stages go, OCL is more unusual than OTL, of course. I thought that was salient to my point. As the owner of an MP1, I know about the OCL/OTL linestage section, but the built in phono is capacitor coupled to the linestage, at least in my unit.