I've been using Silent Source Signature cables with good success in the MA-2s. |
Ralph would be the best source, IMO. OTLs are finicky. |
Sonic_genius, if you owned Atma-Sphere amplifiers you would know they are not finicky. In fact they are ultra reliable, unlike some other OTLs which are/were not -- an unfortunate stigma. If this were not true Atma-Sphere would have gone out of business long ago, but instead they've been around since 1976 and are still going strong. And they carry a three year warranty. A company that's uncertain of reliability doesn't offer that.
Back to the original topic, yes, some power cords sound better than others on them, but I can't post recommendations here.
I'm a dealer, so sprinkle liberally with salt if you wish, but please check out the products before making assertions. |
I own 4 sets of Atma-Sphere power amps and don't think it matters what power cord you use as long as it's beefy. |
Essential: This is NOT what I meant. The amps require a well matched cord. I have owned them including Fouriers. They were my favorite amps but I now prefer SEs. |
The A-S amps will sound slightly different with different power cords, as will all electronics I've ever used. The generic cords A-S supplies with the amps sound okay. Other cords sound better. But the amps are NOT finicky and do NOT "require a well matched cord" as stated by Sonic_genius.
As Essentialaudio says, some cords offer better sound than others. And this is true with any piece of gear offering the neutrality and resolving capabilities similar to A-S. |
Sonic_genius, if you owned Fourier amps you know very well what 'finicky' is. I owned one of their stereo amps for a short time. It was constantly blowing up: decent parts quality but atrocious layout, workmanship, and mechanical design, not to mention components such as output coupling caps used beyond their specified operating range...in other words, a ticking time bomb destined to fail. You should have seen the overwhelming number of amps lined up along and below the benches at Fourier for repair! Tom was a nice enough guy but didn't know how to run a business, and Bryan Carey who took over near the end was far worse IMO.
I gave it away in disgust and moved on to Atma-Sphere. Completely different animals. Sound great, ultra reliable and stable. So as your comment implied, you have not owned Atma-Sphere. |
Thank everyone for trying to answer my question.
I'll contact the Cable Company and will post my results when I'm finished listening. |
Does the S30 like silver power cables or copper? |
Does the S30 like silver power cables or copper? I tried siver and copper power cords witm M-60, both were ok. The amps don't care what you use. Whatever you use, look for good Plugs. I use Oyaide . There are the main differences (good grip). |
Where is Brian when you need him? |
Just to revive this thread. I have the M60's and am in need of 2 power cords for them myself. Wondered if you'd tried anything Thotdoc, (or anyone else), in the last few months and what your experiences were?
Thanks. |
I use 2 Canorus (PAD) but they are first fed into a Pranawire Linebacker. Excellent results into my M60's.
(Dealer disclaimer) |
From what I have read here on the gon, The Stage 3 concepts Kraken power cord is very good, This may be a match for atmasphere? |
Thank you very much for the Canorus and Stage 3 suggestions, (I'd really love to hear the stage 3's). I'm wondering if there is anything in the $500 to $700'ish range worth trying that might be at least in the same vein as those more rarefied suggestions. I was looking at a Triode Wire Labs 7 Plus perhaps or maybe a Shunyata of some description but would be open to other ideas.
Thanks again. |
@ Bhoage, Hi, I would go to the stage 3 concepts kraken thread here, those guys know more about the price point sounds of the concepts cables, I would ask all the questions you have, re-awake the thread, I will like to read what all of you have to say out of interest myself. |
I've used most of the upper-end Shunyata cords with the Atma-Sphere M60s, MA1s, and MP1, all with excellent results.
However I'll agree with the other long-term Atma users on this thread - the amps just are not that finicky wrt power cords and don't think you need top-of-the-line to reap their benefits. If looking today I'd consider the 9AWG Shunyata Venom HC which is somewhere around $300.
The best thing you can do for these amps is dedicated circuits and keep any DC out of the line. |
Try David Elrod. I'd be very surprised if they do not offer a huge improvement. |
Atma-Sphere electronics are demonstrated here with Clarity Cable Vortex power cords. There is no going back.
Dealer disclosure. |
I'm using a Tubulus power cable, which is great! It's based on silvered copper conductors and sounds very clean and detailed. |
I'm using a Tubulus power cable, which is great! It's based on silvered copper conductors and sounds very clean and detailed. |
Thank you all.
I ended up going through different cables and ultimately stopped with Analysis Plus. They worked "best" for me...in my room...with my set up.
|
My friend uses the opening level Analysis Plus on his M-60s and they are excellent for the price. |
