sksos1
Responses from sksos1
| Calculation verification please | |
| Calculation verification please How did I figure out different loading using RCA plugs? (Yes differences are heard, subtle but heard). The MC input load of the unit is set at 1000 ohms 1 For any value -------... | |
| Calculation verification please Agree, which is why I titled the thread "Calculation verification please" The answer ChatGPT gave didn’t make sense to me. (and yes a lot of gibberish but fasinating to watch it do the calculations in a matter of seconds). I can’t replace the 47K... | |
| Calculation verification please I’ve been experimenting into a MC section and the manufacturer says to load between 100 - 800 ohms. I’ve tried 250, 324, 368, 404, 500 & 600 ohms and found I like best the 368 ohm loading. So now want to try using my SUT. Yes it will be fine g... | |
| Soundsmith Sussurro MkII or Dyna DRT-XV-1s @jbomber the SoundSmith is a wonderful choice but I'd highly recommend the Sussurro Gold LE over the Sussurro MKII. I've owned both (including the Hyperion MR) and the Gold LE is my all time favorite. It's still mounted on my Kuzma tonearm. (D... | |
| Vibraplane part needed @trytone don't know who you talked to but I've been the world-wide distributor of the Vibraplane for close to 35 years now and hope I can help you. Please send me your serial number of the unit (located on the back right side) and a pic of the par... | |
| New Gold Note PH 10 @slimpikins5 if I was the dealer you were referring to yes originally I told customers that the PSU-10 at $1100 retail was a LOT of $$$ and IMO was not worth the asking price, better to spend on more records, again IMHO. We have now sold 9 of thes... | |
| Phono stage w/automatic Load-Impedanance. @chakster since you live in Russia why not try and get hold of a SA Labs SUT. I bought one then 3 more since it was that much better than my Kondo SFz SUT (and at a 1/4 of the price). http://en.salaboratory.com/step-up-transformator.html | |
| D'Agastino Momentum vs Dartzeel NHB108 @brianlucey have you considered the Bricasti M15 or M28 amps? Since you use the Bricasti M1 it might be a great match and I'm sure you are aware many recording studies use these amps with great success. Have you had a chance to hear them?(Dealer d... | |
| Bardo and 10.5 vs Stabi S and 4point 9 First I never said the Bardo had grossly or audible speed issues I said it just had speed issues this measured using the Timeline device which uses a quartz clock and said to be accurate to two parts per million. Not many tables can pass the timel... | |
| Bardo and 10.5 vs Stabi S and 4point 9 I owned the Bardo & 10.5 arm and it was a good sounding combo but the Bardo had speed issues (measured by a digital strobe light) and was not as precise as other tables I've owned. The Kuzma tables are built like a rock and the 4Point arm is m... | |
| Kondo Audio Note Io ii+ Kondo AN S 7 II - Keep it or sell it? I'd sell it. The AN S 7 II was surpassed by the KSL-SFz, which I owned both. I just sold 2 of my KSL-SFz step-ups for a superior sounding SUT out of Russia. (Disclaimer:Former Kondo Distributor) | |
| Ugraditus is calling....again. Phono stage? Gold Note just announced the release of the external power supply (PSU-10) for their PH-10 phono unit which is a super inductive & chokes power supply. (Dealer disclaimer) | |
| Phono (0.1- 0.22mV+) or step up for LOMC? I'm no expert but listen with my ears and over the last 20 years I have found adding a SUT has really improved the SQ with just about every cartridge and phono unit I've used. For 12 years I've found the Kondo SFz to be wonderful especially when u... | |
| electrostatic vs dynamic sound Over the last 40 years I've had dozens of speakers but always get drawn back to panels. I've had ML, Eminent Technology, Sound Lab and now Sanders 10e's. All have their pluses and minuses but the Sanders with their room correction is here to stay.... |