zuangbro
Responses from zuangbro
| MHDT Orchid or Lampizator Amber 3? Wish I could post a picture… | |
| MHDT Orchid or Lampizator Amber 3? Oh my! I took all mods listed in this thread and other threads concerning mods to the Orchard, and applied them -all- to a 2hand Stockholm 2 I got for a good price… Installed the Shuguang Treasure CV181Z through an adaptor…..The sound….. is like n... | |
| MHDT Orchid or Lampizator Amber 3? Great! Thanks for confirming! Does anyone currently use the ShuGuang Treasure vacuum tubes CV181-Z? Did you find anything that betters it? (I have a pair inbound now) | |
| MHDT Orchid or Lampizator Amber 3? Grannyring Thank you for your continued sharing of Knowledge on this forum! It is really valuable and highly appreciated.Regarding the ShuGuang Treasure vacuum tubes CV181-Z, are rated at 0.6 amps. Do you now think they might do damage to the dac?... | |
| Modding the Zu Omen MKII If you have new compression drivers, they may need 10-50 hours of break in aswell, depending og how loud you play.. | |
| Modding the Zu Omen MKII New caps will sound dull from the start, and improve after 10hrs or so | |
| Modding the Zu Omen MKII Sounds strange...If you did this right, it should sound anything but muffeled.if you replaced the caps, they will break-in over the next 30-50 hours, and sound great after 200.make sure that all polarities are correct, + to + all drivers and speak... | |
| Modding the Zu Omen MKII Skip the Duelund (that is for the original tweeter) replace that with the larger value Mills, and you’r good | |
| Modding the Zu Omen MKII Now, remember to put the larger resistor value in parallell/across the teeeter binding posts, and the smaller in series after the cap! | |
| Modding the Zu Omen MKII The 850 will fit, but it will involve purchasing new (expensive) lenses from Zu, and some woodwork... There is no way back once you do that.Using the 475-be’s it can all be returned to original, and you can sell the drivers separate if you like. | |
| Modding the Zu Omen MKII Just to be clear, I stuffed the 475-be drivers in there, using the linked bracket. (Or similar) It all fits with no mods, bracket is 1in internal diameter, fits with the Radian 475-be 1in exit. That assembly once mounted will screw right into the ... | |
| Modding the Zu Omen MKII Yes, exactly like that! The cap is the same value you already have.No worries, this is a bit outside most people’s comfort zone :-) | |
| Modding the Zu Omen MKII http://www.bluearan.co.uk/index.php?id=PAUPC20 | |
| Modding the Zu Omen MKII If Zu sais that, it means they did’nt get it right on all their Omen’s... | |
| Modding the Zu Omen MKII I don’t really understand what they are saying there.with the bracket the distance will be the same as for your current driver...if the laws of physics don’t change, when you change the driver, the speed of sound coming from the new driver will be... |