yogiboy
Responses from yogiboy
| Moving up the Harbeth line Here ya go!https://resonantwoods.com/audio-products/speaker-stands/ | |
| how to Implement a High Pass Filter in my setup Good move! | |
| how to Implement a High Pass Filter in my setup I have used that HSU filter when the sub that I was using had no high pass filter. If you use the HSU you can place it near your amp and you will only need a short IC to connect it. You might want to run your speakers full range and see if you lik... | |
| how to Implement a High Pass Filter in my setup Most subwoofers that have two individual Left and Right inputs have one labeled mono or LFE and it is usually the left one. Unless the manufacturer specifies otherwise, simply use the Left input. | |
| how to Implement a High Pass Filter in my setup On each sub you will use the right or left input and right or left output! | |
| how to Implement a High Pass Filter in my setup Preamp output to subwoofer input. Subwoofer output to amp input. This will show you how to hookup a subwoofer!https://3634088.app.netsuite.com/core/media/media.nl?id=69175&c=3634088&h=a2a627c5bd0810a8a2... | |
| how to Implement a High Pass Filter in my setup Yes! | |
| how to Implement a High Pass Filter in my setup Are you sure that that sub has no high pass filter?https://www.audioholics.com/subwoofer-reviews/svs-pb13/pb13-measurements | |
| how to Implement a High Pass Filter in my setup Yes! What subwoofers are you using? | |
| how to Implement a High Pass Filter in my setup The left channel from the pre amp goes to the left sub and the left channel from HPF will go to the left channel of amp. The right channel from the pre amp goes to the right sub and the right channel from HPF will go to the right channel of amp. B... | |
| how to Implement a High Pass Filter in my setup If you pre out and main in on an integrated amp you can do that. Why do you want to daisy chain? | |
| My System's Weakest Link - What Say You... Here ya go!!https://www.mcintoshlabs.com/products/merchandise/McIntosh-Nike-Hat | |
| how to Implement a High Pass Filter in my setup My preamp only has single outputs so I use a pair of this y-adapter on my preamp to feed the high pass filter going to the subwoofer!https://www.audioadvisor.com/prodinfo.asp?number=AQM22FHRDThis is the high pass filter that I have used!https://ww... | |
| Broken ground phono connection Use any screw on the chassis of the preamp. It is the same ground as the one that broke off! | |
| Dali Spector 6 You will have 100 watts with a 6 ohm speaker compared to 80 watts with a 8 ohm speaker. You will be in good shape with that combo! |