yogiboy
Responses from yogiboy
| best sub to match SF olympica 3 If you are not going to use a high pass filter don’t waste your money on a sub with that option. I use my sub with the main speakers running full range without using a high pass filter! If you are going to use a high pass filter you should check o... | |
| Pioneer PLX 1000 ancestry @roberjerman You have about 30 turntables? Wow!! | |
| Moving to smaller room... Those Harbeths are ported and I think they will not be a good match for that size room. You should look at a sealed type LS3/5A design for a small room. The Harbeth P3ESR would be a better fit! | |
| best sub to match SF olympica 3 Check out the JL Audio Dominion D-110!www.jlaudio.com/d110-ash-home-audio-dominion-powered-subwoofers-96283 | |
| Jolida JD-9 MC-High issue with severe distortion/clipping @simao The high output MC settings are too much gain for the 2.5 mv output of the cartridge that you are using. The Jolida is giving you options to match the output with a different range of MC cartridges. Some MC cartridges have an output as low ... | |
| amplifier and speakers Those speakers will be no problem with that amp. As far as sounding good that is another story. You will have to decide on that! | |
| Non-audiophile needs help with older system. Here is one for 100 bucks!https://www.needledoctor.com/Pro-Ject-Phono-Box-DC-Phono-Preamp | |
| Non-audiophile needs help with older system. @n80 That is only a label showing you where to install a phono preamp. You will need a phono preamp to plug into those inputs! If you want to use a turntable you will need one of these!www.musicdirect.com/equipment/phono-preamps/?category=Phono%25... | |
| Non-audiophile needs help with older system. Make sure the tape monitor switches are in the off position on the LS16. The LS16 has no phono section so you will need to buy an outboard unit. BTW, there are no tone controls on the LS16! | |
| Vintage speakers or look a like Any Harbeth should fit the bill!https://www.harbeth.co.uk/ | |
| How tight do you tighten a record clamp I barely ever use the clamp on my VPI. When I do use it I make sure not to make it too tight! | |
| Jolida JD-9 MC-High issue with severe distortion/clipping Is it working correctly now? | |
| Jolida JD-9 MC-High issue with severe distortion/clipping What settings? You should set all the settings for a mm cartridge. A high output MC is the same as a MM cartridge as far as any settings in that Jolida. BTW, I am looking at that manual now! | |
| Jolida JD-9 MC-High issue with severe distortion/clipping Did you try changing the gain settings in the Jolida? It looks like it should be set at low gain output! | |
| Integrated amp for Nola Boxers 1- My first system Yamaha should be a good fit!https://www.crutchfield.com/S-HbYAwJ8JE8M/shopsearch/yamaha_amplifier.html?XVINQ=SX2&XVVer=YJQ&a... |