totem395
Responses from totem395
| Moving Iron Carts or stick with LOMC @chakster The XLZ-7500s has an original stylus, as to the interchangeabilitybetween the XSV-5000's nude steriohedron it was never statedin the OEM data sheets but at the time of production near the endof Pickering anything went. | |
| Moving Iron Carts or stick with LOMC I own both the Pickering XLZ-7500s and the XSV-5000s an interesting note is after looking into things it was confirmed they use the same stylus although OEM provides 2 different replacement stylus numbers, another oddity of Pickering.I have interc... | |
| if you did buy the new schiit sol....... Conrad a collaborator on the arm design mentioned 12 to 13 greff mass less cart. | |
| SME 3009 Series III Haters simply add mass on headshell, 2 g or 4 g spacer provided.Lets not forget the damping paddles in 3 sizes that help in dealing with lower compliance carts. | |
| SME 3009 Series III Haters I've come across on more than 1 occasion where an owner of a series III arm did not care for its sound using the OEM SME cables supplied. It turned out they were running a cartridge that did not like the factory pre load of 275 uF supplied interna... | |
| Has anyone here restored a Sony TTS 8000 platter or a similar strobed platter Outstanding restoration! | |
| Sony PUA 7 to re-wire or not The issue when 2 arms are actually not the same can also be found with the Micro Seiki MA-505.When MS sold table models including this arm it was actually not the same arm when bought separately.No guessing which one is superior. | |
| JVC TT101 QL 10 PLINTH ISSUES I went ahead and built a new plinth for my TT-101 that addressed some of the weaker points of its predecessor a non OEM customjob.Including multiple arm boards and acccustic deadening. I have posted some pictures in my system link. | |
| Thumbs up for ultrasonic record cleaning In other filter applications you start with coarse and proceed withfiner and finer etc. | |
| Plinth ideas for DENON PD-80 DD turntable While on the Plinth subject you can see in the my systems pga constrained layer 90lb Rosewood wrapped exampleI put together for my TT-101.Will accept all arm lengths with 3 arm boards which also elevate using spacers in their threaded fittings. | |
| Tonearm for Technics 1200GR @lewm BTW its a Canadian company so the exchange is advantageous"for those in the USA. | |
| Serious turntable popping problem finally solved!! This case reminds me of the one posted where an alarmremote alert feature was the cause of plenty head scratching. | |
| Audiosilente idler wheel versus Artisan Fidelity idler wheel for a Garraed 401 90,00 EURO is approximately 101.00 US as of today.for the Audiosilente idler wheel.Not sure where the $365.00 is from. | |
| If you had $1,400 , A TTable thing Not sure if your on any other audio forum sites but there are 2 Denons being offered up, neither are mine.One is a 57L recapped for $600, and a 60L for $650.These are both on AudioKarma within the members only section. | |
| Blackbird / SME It's compliance the Birds is on the low side with the light SME non removable head shell version 3009.That said compliance can be a strange "bird" pun intended. |