toetapaudio
Responses from toetapaudio
| Springs under turntable @mitch2 thanks for posting Townshend link, I use them with Cube speakers and imo they improve clarity.I came across this which may be of interest as wellhttps://youtu.be/5ihzvD3urc4 | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure Stephen, yes please let us know how the Duelands perform. If they work you might consider stabilising them by strapping/glueing them to a suitable material in the form of a platform or block incorporating a high quality amplifier terminal at one e... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure To be clear Townshend produce Podiums for speakers and Platforms for equipment. The principal of springs and damper are similar but they differ dimensionally and with different spring rates. Unless your amps are a similar weight to the speakers th... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure @Yorkshireman, we have both the 10 inch and 8 inch available to demo at home so you can decide. In an average size room I think most people would be happy with the 8 inch. It would be interesting to hear from others that have auditioned both. AVS ... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure Stephen, might be worth looking at Dueland cast graphite resistors. Attach to high quality male and female banana preferably by crimped connections if possible or crimp to spade at amplifier end. | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure @keithr not wanting to go off on a tangent here so if you care to PM me regarding my thoughts of pros and cons of Boenicke vs Cube please feel free. We are dealers for both brands in the U.K. | |
| Keith Jarrett on the importance of audio sound quality Good find, thanks. | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure For those looking for a preamp to go with First Watt etc. you might take a look at the Allegri Reference by Townshend Audio. Its a high quality passive design. | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure @thieliste I can’t comment about the Brinkmann since I haven’t tried.The following are possible contendersTektron which Cube themselves use at showsFirst Watt which the USA distributor uses with Cubes at showsACG which AVS has usedVR from this th... | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure There was a post about ACG with Cube earlier in this thread. I haven’t tried but you might consider Bakoon 13R perhaps which I can recommend. The VR also sounds like a good option, although three times the price of the Bakoon. | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure Cal, agree. Ricevs, yes I concur, I first tried this 30 years ago with good results. | |
| Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure All good, thanks David. Enjoying my Cube/Bakoon system. I noticed Srajan had good results also with VR pre and Bakoon as an amp only. It will be interesting to hear what VR/SIT 1 is like from Stephen. | |
| Springs under turntable Hi @indranilsen, our set up atm is Ingress cup and rollers set up in a equilateral triangle on plan, balls touching the equipment directly, bases sitting on 30mm thick black slate which are square on plan, with springs supporting the slate platfor... | |
| Springs under turntable Try combining NobSound, FOS or MD springs with Ingress cup and rollers to obtain greater freedom of movement in the radial and horizontal planes. You may have to use a transitional platform of a suitable material between the two different componen... | |
| Springs under turntable @bobby1945, we recommend Townshend Podiums, they work with a large range of speakers and are available in different platform sizes and spring rates. Worth the investment imo. We use them with Cube Nenuphar’s. See David’s Cube Nenuphar thread for c... |