timlub
Responses from timlub
| ATMA SPHERE SCHEMATIC for a UV-1 M/M....... @mapman Your sentiments are correct in a perfect world... Obviously Ralph is willing to help. It seems that if Will doesn't get the info exactly the drawn out for him that he won't be happy and will continue to Slam Ralph and Atma-sphere. Ralph i... | |
| ATMA SPHERE SCHEMATIC for a UV-1 M/M....... Will, I think you are absolutely correct, this stuff must be crap and you shouldn't have it.... I feel bad for you, so I will pay the shipping to Ralph. Ralph, if you would please, Repair anything that he sends, then send me the bill and when ... | |
| ATMA SPHERE SCHEMATIC for a UV-1 M/M....... @autospec Well, For Myself, I'm a speaker guy and can follow anything that has to do with a speaker, follow direction draw schematics, make changes, repairs etc... Amps, pre's, not so much, but I can look at and follow a schematic and make chang... | |
| Please suggest bookshelf with best bass response under $4000 pr. I build all of my own stuff, so I'm not much help on what is out there, but I can say that I would seek out an MTM.... Double the cone area moving air does make a difference. Good Luck, Tim | |
| Be Careful! I leave my stuff on and use a remote... computer audio 90% of the time so nothing to touch on the system. | |
| ATMA SPHERE SCHEMATIC for a UV-1 M/M....... Here is the PAS-3, all over the internet.... the v5 and v6 boards are both on this pdfhttp://www.curcioaudio.com/pas_mnl.pdf | |
| Ripped off, any ideas? You can also.....Print Your Email from himCall the Police, tell them that he has your product and you are going to get it back. Ask them that you don't want confrontation and ask them to show up with you only to Keep the piece. They will normall... | |
| Ripped off, any ideas? I just went to his "Contact us Page" Sent this short email: I don’t have any business for you, I’m in Arkansas, but I belong to an audio forum called Audiogon….. You might want to be aware of This posting. Its your reputation: See what he says,... | |
| Audio Repair in NJ??? You may have done all of the checks and balances needed, but I would advise that you at least check the balanced out against another source and If you don't have anything else, then grab some inexpensive rca to xlr adapters and see if that drives ... | |
| Budget American made speakers? @wisoguy look at the 1st kit that I posted from parts express, under $1000 and they really are excellent for triple the money, The parts alone sold separately are a fair amount more than this kit. Morel drivers, easy to assemble and you'll ha... | |
| Which preamp for a pass labs? Nothing wrong with an XP10, but I've compared it with others and found it expensive for what it is. I also like the LS25 MkII, In Solid State you might look at a T+A Elektroakustik, used they will fall in the price range of the others. | |
| Budget American made speakers? ok enough, I can't stand the criticism. So even though I recommended and still do, a small floor stander, here is another kit (book shelf) , this one, no cabinet assembly that competes very well at a low price. https://www.parts-express.com/day... | |
| Budget American made speakers? I have recommended these before and sorry, they are not what you asked for, but for the price, I had to throw them out there. They are a kit that you would need to assemble. I'm an old time speaker builder and can tell you that these compete very ... | |
| Why so few speakers with Passive Radiators? Hi guys, Well, a lot great info, a few minor inaccuracy's... Even the Richard Hardesty post is more opinion and not cast in stone. Yes, A passive radiator is more of a vented or ported design. When we do a ported speaker, Lengthening the por... | |
| Does Bi-amping double the power? Depending on what you are using, you could actually be cutting your power. What Happens when you hook A Speakers + B speakers both up is that your Amplifier (I assume Receiver) either parallels or series the connection. So if you are using a SET ... |