solobone22
Responses from solobone22
Thiel Owners Reporting back on class D amps and Thiels (in my space).I bought a pair of the Bel Canto REF600M monos back in November to use with a pair of 1.6's. They worked well however were very recording dependent. I then got my hands on a pair of 2.7's a... | |
Give up on Thiel 3.6 or try another amp again ? I have 3.6 and 2.7. Neither of them work great with the Bel Canto REF600M amps. The Bel Cantos however work great in a Wadia 121 --> Bel Canto --> B&W CDM1SE for an office setup. Usually run that from a computer with ASIO drivers and ... | |
Ground Loop(?) leads to blow speaker Update: I went to test the Creek and it wouldn't power on. Opening it up I found the 2 fuses on the board were blown. Unfortunately they didn't blow before the speaker was damaged. The unit even worked a short period after the initial inciden... | |
Ground Loop(?) leads to blow speaker @almarg your suggestion is most appreciated - will do that this evening | |
Ground Loop(?) leads to blow speaker Hi Al!I'm looking at testing the power supply now. Per the Wadia documentation here: http://www.wadia.com/ContentsFiles/Wadia%20121%20Brochure%20web.pdf • Multiple stages of regulation were designed into the main circuit board to ensure quiet... | |
Ground Loop(?) leads to blow speaker I tested using meter set to the V with the 3 dashes below the solid line. That is the setting for DC. Anyone have further thoughts on this?@gs5556 Is this something that would present itself all of the time or only intermittently? I'm referring ... | |
Ground Loop(?) leads to blow speaker Ran the same test on all the DAC preamps I have:Cambridge DACMagic+L: 0R: 0Mytek Brooklyn+L: 0.6R: -0.1MSB Analog:L: 0.3R: -0.3None of the other preamps have the buzzing problem with the Creek amp. Compared to the measurements from the Wadia this... | |
Ground Loop(?) leads to blow speaker I have a Klein Tools MM300. I set the meter to 200m and tested the RCA output touching the positive line inside the connector and the negative line to the outer barrel.The left channel read 1.0.The right channel read -0.1.This looks to be the cul... | |
Ground Loop(?) leads to blow speaker Thanks Folks!With regards to the 2 pin 3 pin I should have posted that I was referring to the power cable.Working on measuring the output on the unit now. The place that did the repair wants the unit back however I’d like to measure it in its curr... | |
Thiel Owners I have a pair of Bel Canto REF600M's coming this week. Current amps are a Krell TAS and a Bryston 3BST. More as I get the new units setup and broken in.Anyone already tried Thiels with Class D amps?3.6 Upstairs1.6 Downstairs | |
New Bel Canto REF600M using NCORE Have a pair of REF600M's coming this week. Current amps are a Krell TAS and a Bryston 3BST. Speakers are Thiel 1.6 and 3.6. DAC/preamps are Mytek Brooklyn + and Cambridge DacMagic Plus. More details as I get then burned in. | |
Thiel Owners Picked up a pair of 1.6's a few months back and have been hooked. This past weekend a pair of mint 3.6's came up at a local hifi shop. They are now in my living room and I couldn't be happier with them.I haven't spent much time with mixing and m... | |
Looking for opinions of the B&K ST 125.2 Hey There!I have a B&K PT5 running a pair of B&W DM303's powered by either an Adcom 535II or 545. The amps are starting to have oscillation problems an I'm looking to replace them with a B&K 125.2.The PT5 is an excellent preamp soundwi... |