solobone22
Responses from solobone22
| Thiel Owners @thielrules - popping a beer and sitting down to read your paper | |
| Thiel Owners thielrulesfor a fair amount of material w/o measuring anything I am forced to agree with you. I should be thorough in my posts as the devil is in the details!for the most part I listen to large scale works where there are large dynamic as well as... | |
| Thiel Owners ovinewarI went from a Bryston 3B ST to a pair of 7B ST's. The difference was night and day and the 3B is no slouch. I'm running the 7B in parallel mode driving a pair of 2.7's.hth | |
| Thiel Owners @arvincastroRegarding Class D amps - I have a pair of the Bel Canto REF600M's. I've tried them on my 3.6's and 2.7's. I didn't care for them when compared to the Krell TAS (3.6's) and Bryston 7BST parallel mode (2.7's). I've since changed cable... | |
| Thiel Owners @batmanfanRegarding the pre/pro I've been running a Mytek Brooklyn+ providing signal to a pair of Bryston 7BST monoblocks which are powering a pair of 2.7's.Mainly classical and jazz with a fair bit of rock.The Mytek can convert DSD,DXD,MQA, etc e... | |
| Thiel Owners @jserio If I didn't have a pair of 2.7's I'd be all over those!Cable Update:Krell TAS --> DH Labs Q10 --> Thiel 3.6Bryston 7B-ST (Parallel Mode) --> ELF Custom Silver Surfers --> Thiel 2.7This is the best results that I have gotten so ... | |
| Thiel Owners Another vote for the Bryston 7B ST monos with Thiels.I have recently acquired a pair of the last design of the 7BST before they released the SST series.They are running in parallel mode driving a pair of 2.7's with excellent results. | |
| Help choosing an amp for Thiel 2.7s A little late to this thread.I picked up a pair of the Bryston 7BST amps and am running them in parallel mode to drive a pair of 2.7's with excellent results. Previously I was using a Bryston 3B NRB and the difference between that and the 7B mono... | |
| Mark Levinson 333.5 vs Emotiva XPR-1 Monoblocks @levchappy what did you end up doing? I'm looking at amps for my 3.6's as well. Currently I am using a Krell TAS in stereo mode. | |
| Thiel Owners Reporting back on class D amps and Thiels (in my space).I bought a pair of the Bel Canto REF600M monos back in November to use with a pair of 1.6's. They worked well however were very recording dependent. I then got my hands on a pair of 2.7's a... | |
| Give up on Thiel 3.6 or try another amp again ? I have 3.6 and 2.7. Neither of them work great with the Bel Canto REF600M amps. The Bel Cantos however work great in a Wadia 121 --> Bel Canto --> B&W CDM1SE for an office setup. Usually run that from a computer with ASIO drivers and ... | |
| Ground Loop(?) leads to blow speaker Update: I went to test the Creek and it wouldn't power on. Opening it up I found the 2 fuses on the board were blown. Unfortunately they didn't blow before the speaker was damaged. The unit even worked a short period after the initial inciden... | |
| Ground Loop(?) leads to blow speaker @almarg your suggestion is most appreciated - will do that this evening | |
| Ground Loop(?) leads to blow speaker Hi Al!I'm looking at testing the power supply now. Per the Wadia documentation here: http://www.wadia.com/ContentsFiles/Wadia%20121%20Brochure%20web.pdf • Multiple stages of regulation were designed into the main circuit board to ensure quiet... | |
| Ground Loop(?) leads to blow speaker I tested using meter set to the V with the 3 dashes below the solid line. That is the setting for DC. Anyone have further thoughts on this?@gs5556 Is this something that would present itself all of the time or only intermittently? I'm referring ... |