sfstereo
Responses from sfstereo
| Krell FPB 600 or 400cx? Matjet,I have a Lexicon MC12B and a Pass Lab X-1. I am considering replacing the x-1 very shortly and MC-12B as well.Most single box ssp don't sound good on 2 channels perhaps, the 707 might be the exception. I will try to audition the 707 if I ca... | |
| Krell FPB 600 or 400cx? Matjet,Thanks for the great info. I wish Krell would come out with a slightly cheaper version of the 707 with CAST outputs. | |
| Krell FPB 600 or 400cx? I had an in-house demo of the Ayre MX-R monoblocks driving a pair of Revel Salon 2 and I was surprised that I preferred the 450MCX. The Ayre was more refined in the mids and highs but the 450 MCX had much better bass and had a fuller sound.Do the ... | |
| Krell FPB 600 or 400cx? Matjet,Are the new evo series much betterbthen the fpb 450 mcx? I am using 2 450 mcx, a 350 mcx along with a kav 500 for the rears and sides.The 450 mcx still sounds pretty but I wonder if the 400e is much better. I have always preferred monoblock... | |
| Help? Possible problem with my McCormack dna-125. Thermal protection is turning on to prevent damage. | |
| For crying out loud Turning off the display reduces RF. | |
| Speakers for Elite PRO-101FD? I have the same monitor in the bedroom and it''s used with tiny powered Audio Monitor Aego speakers. The speakers are connected to a cheap Parasound AV 1800 processor. I have a direct tv DVR and a Sony blu Rayconnected to the processor.The whole a... | |
| Revel ultima 2 salon owners biwire or not Rd,I am very impressed with the Salon2 so far with just single wire. I would just start with single wire. I may try bi-wire later on but I don't expect much improvement if any at all. I think you will like the Salon2s. | |
| Revel ultima 2 salon owners biwire or not Rd,Speaker cables are Audioquest Everest and interconnects are Sky. I tried bi-wiring with 2 pairs of Everest. | |
| Revel ultima 2 salon owners biwire or not I have tried bi-wiring with my old Revel Studios and did not hear any improvement. I will be setting my new Salon 2s tomorrow and it will single wire. | |
| Pass Labs X1 vs. XP-10 A friend brought over his xp10 and compared it to my x1 a couple of weeks ago. The xp10 has a bit more detail, sound is more transparent and has lower background noise. The x1 is a bit warmer sounding. The differences are not night and day but I p... | |
| Help My Krell 700cx isn't working right. There is a capaictor on the input that you might need to connected to block dc from the preamp. There should be two small connectors/jumpers on the circuit board near the inputs. Removing the jumpers will put the capacitors in the circuit. Are you... | |
| HELP I think I have an electrical issue?? I think you have an airborne RFI issue as mentioned by a couple of other people. The tube amp may be more susceptible to RFI than the Bel Canto due to the open chassis design of most tube amps. | |
| Can Pass Lab X 350 convert from 110v to 220v? I believe it can be converted to 230V. I have converted an X250 from 120 to 230V. It has internal jumper wires and you must resolder the jumper wires.Pass was very helpful and provided the wiring schematic.Good luck. | |
| How LONG have you been an AUDIOGONER'? Back in the good old days of 1998. |