rooze

Responses from rooze

Stepping Up From A Graham 2.2 On A Basis Audio Debut Deck
@solypsa the P2S on the 2.2 is 218mm, 9" effective length (pivot to stylus). A constraint is that the arm assembly can protrude from the underside of the armboard a max of 1 1/4" before it hits the suspended plinth or sub-chasis. The dia of the h... 
Stepping Up From A Graham 2.2 On A Basis Audio Debut Deck
@rauliruegas I agree on arm/cart compatibility. I don't plan to use the cartridges I have on hand for the long-term. My thought is to decide on the arm and then buy a good matching cartridge.   
What's A Good Upgrade From A Manley Steelhead?
@mulveling Great information, thanks. I guess the Steelhead retrieves detail sufficiently, does most things very well, but doesn't imbue the sound with the typical midrange bloom and presence that I expect from tube gear. It's a little bit solid-s... 
What's A Good Upgrade From A Manley Steelhead?
@lewm good point and duly noted.  
What's A Good Upgrade From A Manley Steelhead?
@willy-t Thanks for the heads up on the Sutherland. I wasn’t aware of this technology, using the current and not the voltage generated in moving coil cartridges. It’s interesting since I’m also looking to change tonearms so I can spec the balanced... 
What's A Good Upgrade From A Manley Steelhead?
@rauliruegas OK, thanks for that link. I like what I've heard over the years from Simaudio/Moon - I had their W10 monoblocks some years ago and more recently their 280D DAC. But I'd never really considered them as a contender in the phonostage are... 
What's A Good Upgrade From A Manley Steelhead?
@bdp24 No problem with your comment at all, I'm considering all options and one option is certainly to 'do nothing'. I don't have a large vinyl collection, in part because I offloaded my collection some years ago and took a hiatus, and I've been s... 
What's A Good Upgrade From A Manley Steelhead?
@wrm57 Thanks, I'm a fan of Allnic gear, I've had their 5000DHT preamp, A6000 monoblocks and I still have their H1202 phonostage in a second system. I don't see an H3000 on the used market but I'll keep an eye open.   
What's A Good Upgrade From A Manley Steelhead?
@rauliruegas That link is to a full function preamp. I'm just looking for a phonostage, I have a good preamp. Thanks Rooze  
What's A Good Upgrade From A Manley Steelhead?
@lewm  Thanks, I have the latest version, the Steelhead RC. I'm not about to do any mods to it, though I appreciate that there might be gains to be had. I do like how it sounds and its versatility, but I'm just ready for a change and an upgrade. ... 
Under my tower speakers -- Isoacoustics Gaia, other options?
I've used GAIA IIs, spikes and springs under Spatial Audio X3s and much preferred the springs. Isoacoustics GAIA are a pain with heavy speakers on hardwood floors as they stick to the floor and you can't slide them easily. The springs I used were... 
Budget amp that will give Magnepan 3.6Rs better depth of soundstage
You can pick up a Crown XLS2502 for around $400 used, $650 new. I have one here that I use to drive a pair of passive subs, I've messed with it driving fullrange speakers and it sounds surprisingly good.  I've had 3.6Rs in a room that size and th... 
High powered single end 300b recommendations
Allnic A6000 monoblocks are rated 60w using EML XLS tubes, 4 per side. They also have a toggle for negative feedback and no negative feedback, which helps with more difficult speakers. They sound fantastic if you can find a pair.   
DAC recommendations
The Denafrips Terminator is a great choice. I had the original with updated DSP board and it sounded wonderful. I should never have sold it and still haven’t replaced it. In the future if you have some spare cash and feel like moving up the ladder... 
Klipsch La Scala replacement?
If you like your La Scala I can’t imagine you being satisfied with B&W speakers. I think you need to be looking for smaller horns, Klipsch Forte, would be my recommendation. Or take a look at the Volti Razz. Great speakers, possibly as good a...