rodman99999

Responses from rodman99999

Tuning a back loaded horn
PS: Polyester is nice because you don't have to worry about moths and their larva. 
Tuning a back loaded horn
Stuff the area behind the woofer tightly, and progressively looser towards the vent. The object being to convert acoustic energy to thermal and reduce peaks/nulls in the cabinet response. In other words: Add 1/2lb/ft3 of fiberfil to the coupling v... 
400W amp under $2000
The Hafler Transnova 9505 puts out 750W at 8ohms, in bridged mode, and is fully differential from input to output(unlike a lot of other amps). They are still supported by Rockford Fosgate, that actually built them. Fosgate bought the Hafler name a... 
DIY solid gold interconnects?
Gold is not a very good conductor at all. RCAs and tube pins, etc are plated very thinly(as you observed) simply because gold does not oxidize. Silver's conductivity is not affected when it tarnishes, but it looks bad, so most people that sell sil... 
Considering a change. Avantgarde for Wilson.
Most definately: Get some curtains up in front of those windows. Standing waves are a killer, wreaking havoc on everything you are trying to achieve with your high-end system. 
Considering a change. Avantgarde for Wilson.
With what are you driving the Avantgardes(tubes or SS), and using what interconnects/cables? They are very revealing of any shortcomings upstream. Not to say there has to be junk before them, but any stridency/glare/grain at all could become intol... 
EQ before Preamp?
That's funny: The old fashioned vacuum tubes(mil-spec from the 40's, TungSols and Sylvanias)work best in my amps too. Thanks and happy listening! 
EQ before Preamp?
Eldartford- A question completely off the audio subject(referring to "flying through a nuclear blast"): I thought anything with Metal Oxide Semiconductors would get fried if anywhere near a thermonuclear detonation. Have they gotten around that so... 
EQ before Preamp?
Most people that have purchased the better power purifiers thought their systems were quiet before they introduced the new piece. The general description of the difference is, "a blacker background", I suppose for a lack of better terminology. The... 
EQ before Preamp?
OOPS- My bad. The end of the sentence about the encyclopedia article should have read, "the goal of any critical electronic circuit is low noise AND stability." 
Acoustic Zen Adagio break-in questions....
Try hooking the cable to one speaker reversed, and placing the speakers close and facing each other. The out of phase sound waves will cancel to a degree and you can turn them up more without going quite so nuts. The longer the excursion/higher th... 
EQ before Preamp?
Eldartford- Since you asked: I would have to define a quality component as one that doesn't impress it's own signature on the signal it's passing. Resistors are noise generators and bulk foils(like the Vishays) are some of the quietest. Before you... 
Achieving audio system synergy
Photon46 makes an excellent point regarding room interaction. Type "acoustic foam" into the searchbar on eBay for ideas. Vandersteens- YES, but: Don't pass on listening to a properly set up Magnepan system. You have plenty of room for planars, and... 
EQ before Preamp?
Joeylawn- I have no doubt that he knows a great deal about electronics as relates to Naval Warfare. How much of that experience translates into creating the illusion of live music, played by real musicians, in the original venue in the listening r... 
EQ before Preamp?
Eldartford- Have you ever used any Black Gates in anything? Some say salt, sugar, white flower, beef, MSG, sunlight, etc, etc are to be avoided. Do you? Burr-Brown is recognized in the industry as one of the best. My bubble is one of experimentati...