rauliruegas
Responses from rauliruegas
| What is you tonearm’s Maximum Distortion? @intactaudio : " manipulated numbers without disclosing the manipulation to justify someones choice." " your proposed alignment simply " and way before you posted the graphics I posted to you: " that is the SAT tonearms alignment. " ... | |
| What is you tonearm’s Maximum Distortion? @intactaudio : " If the parameter manipulation is kept hidden then there is another term for it.. " Well, don’t tell to me but directly to the SAT designer. The OP P2S 225.. was asking for better numbers and the SAT ones gaves it. " I have foun... | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 @drbond : Always that we can is healthy that the counterweigth be as close the tonearm pivot/bearing as is posible because between other things improves the LP tracking. R. | |
| What is you tonearm’s Maximum Distortion? @intactaudio : It’s only a parameter manipulation and that is the SAT tonearms alignment. At the end is not rocket science. Btw, Did you already test that kind of alignment?, I do and you can be " surprised " by. As Mark SAT designer says and m... | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 @holmz : " so how important is all this stuff? " Wel, today almost only through Löfgren alignments is the way to set up any cartridge along a pivoted tonearm. So it’s way important. Now, Löfgren alignments exist and its internet calculators ... | |
| What is you tonearm’s Maximum Distortion? @intactaudio : Yes. R. | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 Dear @holmz @drbond : In reality Schroder is using Löfgren alignment the A one. Things are that years after Löfgren created his alignments A/B Baerwald alignment solution gives exactly the same value set up parameters however almost all audioph... | |
| What is you tonearm’s Maximum Distortion? Dear @fusian : You need two additional parameters to make the tonearm/cartridge set up and achieve those figures of lower distortion levels and that I don't gave you and are the null points that are: 80mm. and 126mm. not the one you are using tod... | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 Dear @mijostyn : For years I used the B alignment and today I use the A alignment. In numbers the B alignment gives you 0.04% on average RMS distortion lower than the A alignment but in the other side both kind of alignments are almost the same ... | |
| What is you tonearm’s Maximum Distortion? @fusian : Forgot that if you want lower distotion figures then and using Löfgren A alignments its tonearm parameters set up are:overhang 21.58mm and offset angle 24.8°. Where the maximum error 0.94° maximum distortion 0.33% and average di... | |
| What is you tonearm’s Maximum Distortion? Dear @fusian : Around 90% of tonearm manufacturers used and use one of the 3 best knowed alignments: Löfgren A or B and Stevenson. Those same tonearm manufacturers choose between different but " standard " tonearm efective lengths: 9", 10", 10.5... | |
| What is you tonearm’s Maximum Distortion? @fusian : Here the calculation. For a protractor you can contact MINT-LP and he will makes a dedicated protractor for your today TT/tonearm, ask him for Baerwald alignment. It’s really accurated and not an expensive protractor: https://www.vi... | |
| What is you tonearm’s Maximum Distortion? Dear @fusian : I don't know which kind of alignment you are trying to use. Löfgren A/baerwald ( IEC standard. ) gives you a little lower distortion levels : 0.61% and 0.4% respectively with maximum tracking error 1.78°. Now, it's not easy to... | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 @sksos : " a sound that keeps me engaged and enjoying the music and brings the musicians into my space, or better yet me into their space. " How what I posted could goes against your statement or against true fidelity? or against accuracy that y... | |
| Phono Stage upgrade to complement Dohmann Helix One Mk 2 Dear @sksos : M.Lavigne made a suddenly ( at least for me that I followed him by years. ) turn around to tubes and SUT both no matters what goes against true fidelity ( best SUT is not SUT at all. ) to reproduce adding and losting the less to wha... |