rauliruegas
Responses from rauliruegas
| Tonearm microphonics Dear @infection : " if an arm which is tapped is quite dead, is this an indicator of a superior arm thus allowing to hear more of a cartridges characteristic...? "A tonearm designer takes in count the cartridge needs and he defines the main target... | |
| Tonearm microphonics Dear @cleeds : I know is not a microphone and I know exactly how a cartridge works but in that behavior acts as it. When we tap a tonearm/cartridge combination vibrations are developed and transmited to the cartridge that takes it as a " signal ".... | |
| What sounds best: Vinyl or CDs Dear @mikelavigne : Certainly you are a reference for me and more than two years ago I remember that you posted something very similar on the digital great source quality:https://forum.audiogon.com/discussions/interesting-project-started-by-michae... | |
| Tonearm microphonics Dear @infection : What you are listening is totally normal because that tonearm has mounted a very sensitive microphone in that Skala cartridge ( or any cartridge, it does not matters. ) that when we tap a tonearm we can have that kind of tiny " s... | |
| What sounds best: Vinyl or CDs Dear @chipito: First than all I'm a music lover and as you I own thousands of LP and I really like the analog experiences but today digital sourced experiences hands down analog. It's much better !So, your system experiences are rigth and no troub... | |
| VPI 2nd Pivot for 3D Dear @stringreen : Yes, for years I had the same kind of experiences through several tonearm/cartridge combinations.The important issue here it's that the skate force exist through all the cartridge ridding in a pivoted tonearm.That skating vector... | |
| Who needs a MM cartridge type when we have MC? Dear chakster: If I remember ( too many years. ) David posted somewhere the differences in specs on those models. Maybe you can check with what you have for a coincidence ( he found out differences when you stated are the same. ) but at the end wh... | |
| VPI 2nd Pivot for 3D Dear @folkfreak : So, those tonearms are not any more true unipivots ( good. ) but neither a fixed/gimball design.Anyway, anything out of an unipivot design is just better by a wide margin.What can be really interesting on the whole subject is to ... | |
| Who needs a MM cartridge type when we have MC? Dear chakster: " This is just my opinion. " Problem with your opinion is that you can’t attest ( first hand ) on the quality level performance of the Victor against the JVC because you did not test both in your system as I did it.Btw, I tested too... | |
| VPI 2nd Pivot for 3D " Remember that I'm talking on what we like when listening to unipivots. "that has an error ( my mistake. ) and must be read in this way:Remember that I'M NOT talking on what we like when listening unipivots.R. | |
| VPI 2nd Pivot for 3D Dear @stringreen : " I'm sure in the future, there will be even more modifications and applied engineering to bring tonearm designs to increased abilities "I can't say it in better way. Agree with.Regards and enjoy the MUSIC NOT DISTORTIONS,R. | |
| VPI 2nd Pivot for 3D Dear @moonglum /friends: Torsianally stable?, any tonearm suffers from that torional huge forces but the unipivots are where affects in the worst way to that very hard cartridge job.In any cartridge mounted in any unipivot tonearm design combinat... | |
| Who needs a MM cartridge type when we have MC? That's not the issue but which one has better quality performance levels and this is the JVC one.R. | |
| VPI 2nd Pivot for 3D Dear @folkfreak : It's obvious that the tonearm in that you tube video is an unipivot design or a gimball one with a severe extreme bearing damages.The video is a " dramatization " that helps to understand what is happening in continuious way at m... | |
| Who needs a MM cartridge type when we have MC? Dear @jessica_severin: Even that in the thread was discussed in a wide way seems to me that today gentlemans like chaster enthusiast still has a misunderstood on the X1MK2.The top of the line and the best quality performer certainly is not the Vic... |