rauliruegas
Responses from rauliruegas
| et-2 damping trough-good idea or not? Dear @ct0517 : """ When they are put against a moving vinyl record which is not perfect, and has imperfections I discussed previously - like the ripples; these imperfections, since this is a vibration resonance activity - EXCITE - the resonance... | |
| Who needs a Diamond Cantilever...? 💍 Dear @edgewear : """ So the use of aluminum cantilever has nothing to do with 'ignorance' on the designer's part ... ""could be butb in some cases low knowledge design levels is one of the reason for aluminum cantilevers.In this thread I posted ... | |
| Who needs a Diamond Cantilever...? 💍 Dear @halcro : """ in this Thread you are hearing two ’identical’ cartridges with the ’cantilever material’ the only difference. """identical?, who says that. In this thread exist at least two posts that say different " things " about. In one of t... | |
| et-2 damping trough-good idea or not? Dear @ct0517 : Through my audio years I learned that well damped tonearms designs always performs and sounds better that non-damped ones.I remember at least the experiences with 3-4 of my tonearms: Micro Seiki MAX, SME V and Audiocraft where a... | |
| Who needs a Diamond Cantilever...? 💍 Dear @clearthink : Thank's for your advice that some times is true but here I have good experiences not only with cartridges but with Highphonic.R. | |
| Who needs a Diamond Cantilever...? 💍 Dear @harold-not-the-barrel : Nice to read you are enjoying Highphonic R5 cartridge that was at the middle of the overall Highphonic models.As I said Highphonic made it very good cartridge designs with very good quality performance faraway of tha... | |
| et-2 damping trough-good idea or not? Dear @ct0517 @frogman : I understand the issue of tonearm/cartridge resonace frequency.""" Please note that the tonearm now responds much more slowly due to fluid damping.... """That could affects in some way the freely cartridge stylus riddin... | |
| et-2 damping trough-good idea or not? Dear @frogman : " it does ": that could explain that " overdamping " you named but what I can't understand yet because ( again ) I'm not an ET2 expert is:""" With the aluminum wand (and my cartridges) it was a definite improvement. """Could tha... | |
| Who needs a Diamond Cantilever...? 💍 Dover : You are rigth, mi mistake and apologizes to Moerch designer. Anyway, the example was only to show the existence of copy-cats.The ones like Magic Diamond that took the Denon 103 cartridge motor for their cartridges do you think they are tru... | |
| et-2 damping trough-good idea or not? Dear @frogman : I’m not an expert with the ET-2 that I owned many many years ago.""" need for it by overdamping.... """overdamping?, why overdamping?. If that " damping " does not affects the normal and " free tonearm/cartridge movements from wher... | |
| Who needs a Diamond Cantilever...? 💍 Dear @best.-groove : The use of aluminum material in cantilevers has other reasons additional of what I posted.One of those reasons could be the low knowledge level of the manufacturer to design something better because if that design only sounds... | |
| Best Analog for $10K Is a good learning " lesson ".R. | |
| So many great golden era DD tables out there, what do you recommend for $1000? https://www.vinylengine.com/library/grace/g-545f.shtml | |
| Best Analog for $10K Thank's for the link.R. | |
| Who needs a Diamond Cantilever...? 💍 Dear @best-groove : """ From what I read then aluminum is dominant in cantilevers for several expensive... """no, it's not that way only some models. The SPU case is especial because the 80% of sales are made in Asia and Japanese are so idiocin... |