128x128

ratbbb2

Responses from ratbbb2

Morrow Audio Cables Feedback
I've had Morrows MA4 and PH6 for a few years and just ordered MA6s  If I love them I will keep if not I will do what I did with their power cord which was very good maybe even better than what I have but not worth the added expence for me.   Two o... 
E.A.R. 834P vs. Rogue Audio Ares
I too jumped on the rogue Ares completed by the Cinemag 1254 . Now I'm not sure if I could top it without spending considerably more.BTW I have tried several tubes and Found the Sylvania 7025 much to my liking. I've changed the 12 AU7s as well wit... 
Rogue Owners Unite
Anyone hear of a new preamp from rogue? A buddies of mine said he had read something a month ago and I cant find anything . He said it wasnt the Athena or hera 2 
Break in for ICs from CDP
So as I read this thread I wonder why wouldn't I just buy a $39 cdp or bluray and play copy of the Vandersteen calibration disc or any set up disk. Another thought was to get a cheap used receiver with pre out/ power in and plug the ICs in that sp... 
NJ Audio Society?
I've Got two other buddies that get together about once a month and are open to adding to that . Have a tight space for listening at home but was thinking of a conference room at a local hotel so we can bring gear to compare and discuss. Has anyon... 
Rogue Owners Unite
Looking for a rogue 99 pre in NJ/NY area to do a comparison between the standard my 99 Mag and Super mag . I loved my Magnum then upgraded it to SM status . Now I'm curious as to what the differences are and plan to do a live comparison. 
Best of 2014 so far with bitchin soundstage?
Sorry 'bout the double post and wanted to mention that I bought the back up until the sound got a bit fuzzy then worked it back down until the blend of center and speakers were right . (VPI arm and table Lyra and Shelter carts) 
Speakers for Coffee Shop
I was just at a local pub in the afternoon and had to go look at what speakers where being used. The B&W 600 series sounded awesome. for a flatter response I would look into the JBL pro (control) series have owned the Pro 8s for lots of years ... 
Best of 2014 so far with bitchin soundstage?
Hi Fourwds , Thanks for the reviews . I listen mostly to Vinyl in my audio room and found that centered affect where you totally lose your speakers and many think thats the cats meow but I wanted more. So , after Tubes changes speaker placement ca... 
Best of 2014 so far with bitchin soundstage?
Hi Fourwds , Thanks for the reviews . I listen mostly to Vinyl in my audio room and found that centered affect where you totally lose your speakers and many think thats the cats meow but I wanted more. So , after Tubes changes speaker placement ca... 
SL1200 upgrade tonearm or replace cartridge?
Didn't read the whole thread so forgive me if I'm repeating anything here. I would look into a good Cartridge and Phono Stage . Then set it up correctly Can the Arm on the 1200 be adjusted for hight (vta) ? Itis amazing whate those two "components... 
New KT150 tubes?
if the come anywhere nere the Tesla Vršovice kt88 in sound I will gladly pay $7-800 for an octet. The Eat KT88 which I believe to be the same as the tesla are fetching $1400 for the quad which is crazy money for (most of us . that being said those... 
Any love for the Rogue Ares
I have been Using the Ares with stock SUT (cinemag3440) and have tried and outboard 1131 from Bob's Devices with debatable results. I use both an Original Lyra Helicon at 0.35 mV and a Shelter 901 at 0.5mV both sound Great The fact that you get se... 
Any love for the Rogue Ares
I have been Using the Ares with stock SUT (cinemag3440) and have tried and outboard 1131 from Bob's Devices with debatable results. I use both an Original Lyra Helicon at 0.35 mV and a Shelter 901 at 0.5mV both sound Great The fact that you get se... 
VPI bearing oil/grease?
Ok after looking at the Super Lube that Music Direct offers I look it up and found it at Graingers http://www.grainger.com/product/44N750?gclid=CPuj_5HEgrsCFeHm7AodoCIAog&cm_mmc=PPC:GooglePLA-_-Lubrication-_-Lubricants-_-44N750&ci_src=1758...