VPI bearing oil/grease?


I know this has been discussed and forgive me but I'm a little confused. Most of my confusion is from talking with Mike at VPI. I called VPI years ago to ask what type of lubricant to use, the answer was white lithium grease. ( no mention of any of this in the owner's manual) After my bushings were replaced a few years later with bronze, I inquired as to what oil/grease was recommended. The answer was 40W oil. After reading other posts here, I've read that Mike has recommended Mobil synthetic, I don't ever recall them recommending VPI bearing grease to me or anyone. I'd like to get a definitive answer from VPI users here. Thanks.
128x128slaw
Frogman: I think speed stability has to be a consideration regarding any lube. Regarding leaner/weightier tonality, I'd say the DuPont goes towards weightier, but with a solidity that wasn't there before.

There are a host of other system variables that can make this issue a positive or negative. I'm currently testing preamp isolation and that is 'huge' with regards to the overall sonic picture. I'm glad this issue came up again, for it's easy to get "settled" on a system's sonics and then, change just one thing (like preamp isolation) and the whole systems' sonic picture can change rapidly.
Dopogue: FWIW, I use lint free swabs on a stick along with 99.8% pure isopropyl alcohol. No problems at all.
Ok after looking at the Super Lube that Music Direct offers I look it up and found it at Graingers
http://www.grainger.com/product/44N750?gclid=CPuj_5HEgrsCFeHm7AodoCIAog&cm_mmc=PPC:GooglePLA-_-Lubrication-_-Lubricants-_-44N750&ci_src=17588969&ci_sku=44N750&ef_id=UONZ4QAAUmx2ZV@-:20131126131422:s
VPI sells their own lubrication - it comes in a hypodermic type of applicator, and although it is called Magic Lube and is probably expensive for what it is, I know that it is the recommended stuff that VPI sanctions. (It looks like lithium grease)
Stringreen,

VPI uses Super Lube. At least that's what Jack sent me for my Classic.