128x128

pbnaudio

Responses from pbnaudio

Lemon HiFi-Tuning Fuse?
A fast blow fuse as a AC mains fuse feeding a presumably linear power supply (Transformer/ Diode Bridge/ Capacitor) is highly unlikely,  much more common is a slow blow for this application, your original fuse will have some letter stamped into th... 
Confessions from a VPI owner of some 30 years
Don't know what motor unit you have, however I have experienced a similar issue with the dual motor flywheel drive station, motors would vibrate,  replacing the capacitors in the motor unit cured the issue.  May be worth a shot they are only a few... 
What's been playing on your turntable and what turntable is it ?
You want it Darker - Leonard Cohen - PBN Audio GrooveMaster Vintage Direct DP2 with Graham Phantom Supreme 2 carrying a Lyra Etna :-)http://pbnaudio.com/audio-components/audio-turntables/groovemaster/groovemaster-vintage-direct/pbn-d...Good Listen... 
Technics Sp-10 platter screws
Just received the picture from my customer, the other type is identical to the ones Spencer posted, hence probably the original.  The other type I have must be an "aftermarket" version,  strange that I would end up with two of them  :-)Anyway the ... 
Technics Sp-10 platter screws
Lewm - Maybe not but I have had two identical ones both with this type washer - bought at different times and from completely different sellers.  I will post a picture tomorrow of the other type I have had come through here of this type I have als... 
Technics Sp-10 platter screws
https://systems.audiogon.com/systems/4923Above a link to my system with a picture of the washers I mention, I've had two different kinds, two of each, two like this and two with a larger screw head where the washer also had a cavity in which the s... 
Technics Sp-10 platter screws
I've had four of the MK2 come through here and all of them have had washers / bushings under the three screws that hold the platter to the motor. so I don't know what you are talking about - will post pictures on my systems page later today.Good L... 
Technics Sp-10 platter screws
It depends on the type washer thats with your SP10, I have had a few through here - the current one have a flat on top washer with a bushing part through the platter - it use a M3 x 12MM screw.  I have  had others that have a countersink on top th... 
Entry Level Interconnect Reccomendations
https://www.bluejeanscable.com/store/audio/index.htmMy go-to for entry level cables, BJC is an excellent company too.Good ListeningPeter 
Which Clapton CDs?
Blues - is a fantastic album. notice is is not in the "store" but here it is - highly recommendedhttps://www.amazon.com/Eric-Clapton-Blues/dp/B000WTTC9O/ref=sr_1_1?ie=UTF8&qid=1480091683&sr...Good ListeningPeter 
Listen...chair
http://www.ekornes.com/us/stressless-recliners?wvsessionid=e5339304f42e4647a02e63fd2756a8c8Third or fourth the Stressless a fantastic listening chairGood ListeningPeter 
Cartridge recommendations
Our Liberty B2B-1 can be set to any desired loading 500Ohms is one of several standard selectable load settings, any customized load can be requested on ordering of this little gem.The Denon DL103 and 103R are very nice cartridges for what they ar... 
dynaudio consequence suspension rings for woofers
The reform kits for the DynAudio 30W100 is readily available on eBay http://www.ebay.com/itm/Speaker-Repair-Kit-for-DYNAUDIO-11-30W54-30W100-/380330980413?hash=item588d7...And second Bill at Miller Sound - expert serviceBest of luckPeter  
Why So Many Raidho Speaker For Sale?
Inna "Danes don't know how to make speakers"  Are you Serious ????  Some of the most respected high end drivers are form Denmark, I assume you are aware of Brands like ScanSpeak used widely in numerous high end speakers all over the world.Good Lis... 
speakers on pallet
Most definitely ship laying on back if possible, this way if the pallet or crate gets dropped the weight of the motor structure (magnet and pole plates) have little chance of shifting or breaking off.  Have shipped thousands of speakers this way.B...