minkwelder
Responses from minkwelder
| 2 Stereo amps to be used in Mono...hookup? You would "Y" connect the left output of the preamp into the left and right input on the amp that you hook your left speaker to and "Y" connect the right output from the preamp into the left and right inputs of the amp that you hook your right spe... | |
| 2 Stereo amps to be used in Mono...hookup? Yes. The manual states that, for mono use, "...you will need to feed both input jacks with identical signals from a 'Y' connector. The speaker leads must be connected to the two outer terminals only". | |
| A song murdered by someone. Guns and Roses' version of McCartney's Live and Let Die. | |
| New Look for Audiogon hard to work with Ridiculous!! | |
| Aerial 10T's in the house... "I unboxed the top cabinets... that box alone was about 80 lbs!"Yep, those head cabinets are cast from a stone-like stuff called Novalith. HEAVY! One thing I had to do to mine was replace the dual bananas that connect the tops to the bottom cabin... | |
| Aerial 10T's in the house... I was a die-hard fan of Maggies for 3 decades. That was until I got my 10T's. They need some breathing room and careful placement, but you're in for a treat. | |
| What The Specs Don’t Tell You… And Why Great presentation that destroys the myth that if two audio components measure the same, they will sound the same. It could be summarized by this statement from the presentation (paraphrased):"Not all that matters can be measured, and not all that... | |
| Shopping at Goodwill anyone? I have found at my local Goodwill, a pair of KLH Seventeens for $1 ea., a Thorens TD-165 for $3.50, a pair of Pioneer HPM-40 for $.50 ea.(needed new surrounds), and a Sansui AU-517 for a decent price that I can't recall right now.I check it out a ... | |
| Manual gain controls on Hafler 9180 These controls are input signal attenuators, which can be used to better match the preamp to the power amp. They can be useful if your preamp has more gain than needed. This can be a problem when using higher output sources such as CD players.A sy... | |
| Are Aerial 10T's still considered a Good speaker on 2018? Hey, congratulations I know you're going to love them! I have been wanting to try out some Class D stuff on them. Right now, I'm using a Wyred4Sound STP SE and a SST Son of Ampzilla II. So far SO GOOD! I've been grinning non-stop since I bought m... | |
| Are Aerial 10T's still considered a Good speaker on 2018? Funny you should ask! I just bought a set of MKII 10T's a few months ago "at a steal of a deal", and I'm loving them. I don't have experience with newer speakers that are comparable, so I can't specifically answer your question. Until someone do... | |
| Set me straight, don't pull punches According to the instructions, the AUX2/Phono switch merely switches the AUX/Phono input from line level gain to the higher gain needed for an MM cartridge, along with the equalization necessary for proper phono playback. I'm assuming that your t... | |
| Set me straight, don't pull punches The Nova 300 has a button on the front to select between line level and phono when using the AUX2/Phono input. | |
| Vintage Luxman L-450 crackle and hum Many of the problems on the Luxman units of that vintage were due to the thermal breakdown of integrated circuit modules (DML's) that are no longer available. There is a guy in, I believe, Holland named Hans Hilberink that makes replacement module... | |
| Aerial 10T Mk2 - Suitable Amplifier? The 10T's are so good that they have broken up my long-term love affair with Magnepans. I recently purchased a set of the MK II's that I think play very well with my Son of Ampzilla II. My preamp is the Wyred 4 Sound STP SE, which I particularly... |