mbhcid

Responses from mbhcid

Speaker Cable Recommendation
Both Auditorium 23 and Audio Note Lexus (or ISIS) will give you a warm, rich and natural sound.   
Which DACs are known to be sweet/rich/relaxed?
Audio Note   
Ordered Visaton B200 for open baffle. Am I alone?
Fiddler, I probably should have prequalified my "warm & lush" statement by divulging that my last speaker was a Lowther-based design ;^) 
Ordered Visaton B200 for open baffle. Am I alone?
Similar....i've been toying with the PHY KM30 in a birch ply semi-open baffle (see PHY site for plans) with very good results. BIG, warm, lush, tonally correct, detailed but not in-your-face, and engaging. Having a great time with 2A3 & 300B. ... 
Blinded by the Lights
I've been eliminating or switching off these lamps for years. The only thing I like glowing in my system is the tubes! Try either wiring-in a small resistor (experiment with value) or disconnecting the lamp altogether. Alternately, you could wire ... 
Best way to remove static build-up?
Humidifier. Fill with fresh water every couple of days and change the filter every few months. You'll be amazed at the overall difference in the sound (esp if you have metal dome tweets) 
S.E.T. Amp DIY Kits
Welborne Labs provides great kits, excellent service, and reasonable pricing... http://www.welbornelabs.com/ 
dave brubeck show saturday night
Yeah, he's probably not any good after 60+ years of practice. If i were you i'd stay home in the trailer, crack open a twelver, and watch the Simpsons. 
SE Tube Amps
A good place to start....http://www.audioasylum.com/forums/set/bbs.html 
A shocking reminder
Better solution - buy a humidifier and get the humidity up in your room. In addition to eliminating static, the whole system will SOUND better. 
SET Tube Question
You may also want to try these sites. Each has a user forum and SET products for sale, both kit and assembled. http://www.welbornelabs.com/http://www.bottlehead.com/ 
47 Labs battery power supply
Call Brian from Pure Power at 732-846-3324 
Avantgarde Duo upgrades
If you're handy with a soldering iron, you might try these crossover upgrades:http://www.markus-kroeckel.de/I used Jensen oil caps and Goertz inductors and it took my Duo's to another level. 
Using "load resistors" to break-in an amp ??
I've had good results using the 8 Ohm 20 watt wire wound resistors available from Radio Shack. Just attach them across the binding posts and turn the volume up to low to medium level. Good luck! 
Lowthers - Please educate a village idiot...
I have Lowther DX4's that your welcome to audition. I'm about 1 hr away.Drop me an email if interested.