matrix
Responses from matrix
| Biamping Triode Tubes No Feedback With Solid State Unless you can match the input specs. and power differential, in otherwords if your top end of the speakers are like 95 db and you have 50 watt triodes, and the bottom end woofers are 89 db with like 300 watt solid state and all it is matchable, i... | |
| Major help needed in Input and output impeadance.. Okay guys, heres what I foundBalanced audio tech in fact builds a preamp with 750 ohm outputs, it states on there chart it is recommended not to go below 10,000 kohm amp... they have models capable of even driving some rediculosly designed amps wi... | |
| Major help needed in Input and output impeadance.. They are 6 ft... could be possibly shortened a bit maybe to 4 ft if necessary, but they go to mono blocks so got lower margin for adjustment for the distance. | |
| Major help needed in Input and output impeadance.. I got you, just need to experiment, use the best equipment possible to get the job done, thanks guys. | |
| Major help needed in Input and output impeadance.. Jeffreybehr, What I got from what you are saying is that my ratio would be 1:17 ? Which seems that I will not get full output then, but maybe I am not getting it thanks again. | |
| Major help needed in Input and output impeadance.. Jeffreybehr, I do have a Tube Hybrid preamp, But you lost me a little... So I should be capable of full output with 600 ohm preout's, and 10,000 ohm inputs on the amp? Sorry you used a spec double that as an example and got a little confusing, thanks | |
| Major help needed in Input and output impeadance.. I know what your saying, I just was reiteratting the fact for some reason the "Flagship" pieces seem to spec. frequency out of this world, whether it will help anything is another question. Actually thats funny I did just have the Wadia modded, wi... | |
| Tube's needed, 6922's or equal for Preamp Qty.3 Chuck, Yeah I saw that with the links, I got it thanks. | |
| Preamp with most dynamic contrast? Well I can tell you it is the preamp more than likely, I auditioned an Electrocompaniet 4.7 this year and it was very un-exciting to be honest. It almost seemed as if it did not have enough gain dynamics whatever, it was boring, but this could be ... | |
| Major help needed in Input and output impeadance.. Gmood1, Thanks I do understand the standard is 2 volt, but I can assure that my Wadia CD player in fact puts out the pro audio standard voltage of 4 volt at the RCA's As well as XLR, as why it much more full and powerful sounding than most players... | |
| Tube's needed, 6922's or equal for Preamp Qty.3 Cool looks like I have some good ideas here.. If any more keep em' coming thanks! | |
| Major help needed in Input and output impeadance.. Hmm well the amp has no spec. on the input gain shown, but the pre amp is from 2 volt to 10 volt output, so if I have a 2 volt cd player I would guess I get 2 volt out of the pre, maximum out would be 10 volt, so in my case I do have a 4 volt out ... | |
| Amp for rock/metal with high efficient speakers You need one of the higher monster amps, not only because of power or the fact tubes won't drive those 15's to well but fact is any high efficiency speaker in order to drive rock bottom bass in my opinion and experiance Needs as Much Current as po... | |
| Why so many "newer" Mac's for sale? I'm sure it is simple production #'s, they do pump out 50 amps vs. 5 amps to 90% of the other manufactures in their price range... Its the same with Klipsch, they are high production and have Many dealers so for a piece of gear that comes up every... | |
| Nuforce Now, now, PHD you were told the parts argument is weak already! To bad I agree with you. |