maczurak
Responses from maczurak
| Dynaudio Confidence C1 broken & Cap question The C1 crossover is at 1.8K so modifying this would not be an option for limiting the low end response. If you want to limit the low end response sent to the C1s, place an active crossover between the pre/power amps and direct the low pass to the... | |
| My Line Arrays and Dynaudio monitor - where to go Desalvo55,I have used C1’s for the past three years in a 2.2 configuration with a Simaudio W-3 power amp in a 15’x13’ room. I decided to use a monitor/sub configuration as this allowed to purchase speakers with the best sonic characteristics for t... | |
| Getting The Most Out Of My Scout You have the Scout on a wall shelf mounted to the upper portion of your cabinet. Have you tried placing TT on a solid table somewhere else in your room? I wonder if this might allow you to gain some additional performace from what you already have... | |
| VPI Scout "tweaks" Got the brass feet from Star Sound last night. To my ear they were a big improvement.Stanwal,I am curious which Audio Points you purchased and what the thread height was? I am thinking of doing this to my table. Might order the 2.0AP-1A.5 Audio Po... | |
| Rim Drive Mod or how to make it even better Its interesting you mention this. I have my SAMA placed on a 6 x 6 slate tile and isolated from the maple platform using Sorbothane feet. I am also using silk thread belt for the Super Platter. The plinth rests on footer so both the SAMA and plint... | |
| Deep Cleaning Records With Steam? Mapleshade does not just sell a steamer for $150. They sell a kit for $150 which includes a steamer unit with additional propietary cleaning fluids, mat and cloths.PHONOPHILE DEEP-CLEANING SYSTEM1) The highest capacity hand steamer with the best s... | |
| VPI anti-skate device Arnold,Have a look at the VPI web site under "Products and Accessories", "VPI- Accessories", "VPI - JMW-9 Anti - Skate Assembly". There are a couple of clear pictures located on the page. | |
| VPI Scout Rubber Washer Issue Hevac1,Thanks for the warning! I always thought the thicker records required too much force to flatten with the clamp and washer. Fortunately I have not cracked any thus far. It certainly would be nice if this information was published somewhere, ... | |
| VPI anti-skate device Actually, I have been optimizing the AS these past months to achieve the best sonic characteristics from my setup. During the beginning of the process, this also included other tonearm setup parameters. Thanks to all who contributed to the ZYX car... | |
| VPI anti-skate device I have been playing with the anti-skate for the past several months with my 9 Signature tonearm. I am not using any twisting of the tonearm leads.This is a picture of how I have the AS setup on my TT. I do not have an original at this time so refe... | |
| Deep Cleaning Records With Steam? This steamer is also not available where I live. I ended up purchasing another hand held unit that was available locally. I would suggest looking for one that has a right angle adaptor so you can direct the stream of steam down toward the LP if yo... | |
| Has anyone added a second belt to their VPI Scout I have a spare belt for my Scout. I added the belt to the 300 RPM motor pulley and adjusted the platter speed. Everything was flat and dull sounding with the two belts. Popping one belt off restored the energy and dynamics.Even if there wasn't a d... | |
| Has anyone added a second belt to their VPI Scout Since you have a SDS for your Scout, I would suggest replacing the VPI belts with a thread belt. I tried mono-filament fishing line (Spiderwire) and silk thread. I preferred the silk thread using a blood knot as I can get the knot to reduce to a s... |