luisma31
Responses from luisma31
| Denon DA 307 and DA 309 Just mounted a Denon DA-307 on a Luxman PD-444The DA-307 VTA / tonearm height must be adjusted as it is almost leveled with the PD-444 platter, is the tonearm height adjusted with the 2 tiny screws on the tonearm silver base? just loosen the screw... | |
| Vintage DD turntables. Are we living dangerously? Have to report adjusting and centering the motor on the PD-444 was extremely easy once you know how to do it. I am stunned by how simplistic yet great engineering this TT offers, I am sure it is not the best TT out there, surpassed by some others ... | |
| Best ultrasonic lp cleaner in 2020 and what surfactant best? So Triton X-100 two drops per liter of cleaner. This cleaner should it be just distilled water or 98% water 2% isopropyl? | |
| Vintage DD turntables. Are we living dangerously? Certainly good advice, I just don’t have the skills or tools to open the actual motor where the spindle and magnet mechanism are, afraid to break it, I could open the housing but removing the board with these thin wires etc. I don’t think will do.... | |
| Vintage DD turntables. Are we living dangerously? Thanks @big_greg but I see the platter touching the "escutcheon"Opened the motor there is nowhere to put oil there, looks completely sealed, from the top of the spindle it looks sealed too I don't know if putting one drop of oil there will go "in"... | |
| Vintage DD turntables. Are we living dangerously? Just found this by Lew In addition to adjusting the screw under the bearing well in order to set platter height, one can also shim the motor up, if the platter is rubbing on the escutcheon. I found on my TT101, in the course of investigating th... | |
| Vintage DD turntables. Are we living dangerously? This is certainly odd to say the least, I can't fit the motor back in a way the platter doesn't touch the plinth and turns freely, it came already kind of leaning towards the right by a millimeter or so but now it just won't fit properly, I wonder... | |
| Vintage DD turntables. Are we living dangerously? I am in the process of opening my PD-444, checking the boards etc. very clean I have to say.Should I lubricate (or try) the spindle from the inside of the motor? with synthetic oil? or I better leave it the way it is?I just realized that loosing t... | |
| Looking for audiophile friends in Tampa Miramar Florida, not many audiophiles around here | |
| South Florida I'm in Miramar Florida, Miami, Hialeah and Broward, not many audiophiles in this part of the US I think | |
| Technics SL-1210GAE Anniversary delivery . Finally, TT arrived yesterday, I haven't set it up yet, I swore to myself I'm setting up the Luxman 1st. | |
| What's wrong with classical music on vinyl? Temporal displacement indeed, best comment so far | |
| Blue Note Tone Poet Series Got the entire collection, awesome analog to analog, very well priced at Amazon, Kevin Gray what can I say. | |
| Are there any tube amps that don't give off any--- I have a small integrated amp with 6C33C that put out a lot of heat and I biased these low, to the point that the entire amp innards get very hot, I set a Noctua silent fan underneath which helps with the heat but in the OP's case will only move t... | |
| Are there any tube amps that don't give off any--- Hi Ralph, what happened with your prototypes? Any closer to your class Ds? |