lgo-jerry
Responses from lgo-jerry
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? I'm now trying Iso-Acoustics' OREA Bronze as feet or as platforms under the Rega's standard plinth feet. I'd rather these pucks were adjustable. | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? After many adjustments and readjustments, setting and resetting of everything associated with the new tonearm, and much listening to get it to the point where it is now, I can honestly say that the OL Conqueror tonearm works well on the Rega RP10 ... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Did a lot of listening, breaking in today. I noticed that the arm height was sinking. Found that if I tightened the large nut beneath the plinth and the VTA adjuster clamp sufficiently, movement of the arm body was minimized and height/VTA could b... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Yes. That's what it says in the instruction manual. It's a pain, especially that fine adjustment peg. | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Was able to position the skeletal structure so that the tonearm cables hang off the back edge of the top of the stand, a temporary fix that allowed me to continue the tonearm setup, mount and adjust the cartridge and spin a few records before stop... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Received the tonearm earlier this week. Working on the mount to the RP10 plinth now. Things I’ve learned so far: The RP10’s top brace is magnesium, while the new P10 uses ceramic. Whatever Rega says about stiffness may be correct, but I expect it ... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Just completed the purchase, As this thread may be of interest to someone in the future, I'll post my thoughts and experience following receipt and mounting of the tonearm. My thanks to those that contributed to this conversation. | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? OL says the tonearm should fit without interference. | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Oh, Good Grief... I bet the part that would cause interference doesn't move with the tonearm! I bet that's a fixed position part, and if so, the tonearm should fit. | |
| What Are The Differences Between The Vandenhul Cartridge Families I understand. I had two Dynavectors that were quite good before I bought the pricier and vaunted XX 2 MK II. and that cartridge was not a good experience. Cartridges can be an expensive pain. | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Hi Tablejockey, I’m waiting on response from OL. However, looking closely at my table, I don’t think the OL arm is going to fit, unless the frame that holds the arm tube rest is smaller than it looks in photos, or is up high enough to clear the pl... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Good Pindac, one learns from research and research includes asking about the experiences of others. While I do appreciate your advice in different areas of HiFi, you haven't indicated that you've actually owned an RP10 or P10 or any Rega skeletal ... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Thanks, Pindac, I appreciate the advice. BTW, I’ve been using a Solid Steel Series 5 rack, the older square tube with round legs model for years, entirely filled with microbearings, and I have used several platter mats on the Rega’s Ceramic platte... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? I have a Parasound Halo JC 3+, so I think I'm good there. A different table, perhaps like a different tonearm, may only be different and not better, but one never knows without trying something else. All good advice. Again though, if someone has... | |
| Will Origin Live Conqueror tonearm fit my Rega RP10's skeletal plinth? Thanks, Pindac. I think I understand what you mean regarding constraints on the sound. I've made several changes in associated components over the past two years and every new addition has made a definite improvement. I've bought much better pho... |