jackd

Responses from jackd

Is the NuPrime CDT 9 Pro a Best Kept Secret?
Doubtful that Jason will know off hand.  He will have to contact the engineering team at the factory in Taiwan to get the answer.   
Running Benchmark AHB2 in bridged mode and 4 Ohm Speaker
Simple answer is to buy one and see what you think. A second is just a click away at the same price. The top half of the Aries is not that hard to drive just like the top half of the Vandersteen powered models. My choice would be the BHK 250 which... 
Need Preamp and Amp to Match Vandersteen 3A Signature Speakers
There is a Belles 350 on A'gon right now that will fill the bill.  Just pick a tube preamp of your choice and the DeHavilland mentioned earlier is a good one.https://www.audiogon.com/listings/lis96dbg-belles-350a-solid-state?refsource=hifishark 
Triode wire or audio quest
Triode Wire Labs.  I use a full loom in my main system.  Fairly priced, 30 day trial period and you can talk to the owner himself. 
My recent experience with 3 pre-amps - help me pinpoint the next upgrade.
The JC-2 gain is only 14db at the maximum setting and you can turn it down to 4db so that is not likely the source of your problem. Also the input sensitivity for your amp is 1.8 volts which should easily accommodate the JC-2 at maximum.  In fact ... 
CD Transport that has I2S hdmi output, cheaper the better.
George It's the same OEM factory responsible for the Audiolab players if that helps with your research on the laser.   
CD Transport that has I2S hdmi output, cheaper the better.
George He is a pretty comprehensive review from one of the Far East publications that may have the answers you are looking for.https://review.u-audio.com.tw/reviewdetail.asp?reviewid=1528 
NuForce STA 200
@jl35 The DAC-9 will work fine as I tried it briefly with the DAC-10.  My preference is the W4S STP-SE. 
CD Transport that has I2S hdmi output, cheaper the better.
If you know the people at McLean's see if they have the Nuprime  CDT-8 transport in stock.   
Kinki EX M1 user comments
Right is on the top. 
Is Marantz AV8805 good enough pre amp for McIntosh MC8207
High end Marantz processors seem to be the go to choice with people integrating HT and two channel systems so it must be fine.  Other options at a higher cost would be the Classe' SSP series. Unless you "need" all the extra channels of the 8805 yo... 
Any Avantgarde Duo owners in Atlanta GA?
Jim was actually the AG distributor for many years.  
Is Marantz AV8805 good enough pre amp for McIntosh MC8207
Aren’t some of the Mc AV processors based on Marantz designs anyway? That Marantz should be far ahead of the outdated Mc offerings at a lot lower cost. 
Still looking for an amplifier upgrade- but with a new twist.....
The BHK 250 is a great choice with it's tube front end.  Here is one from a respected authorized dealer.https://www.highperformancestereo.com/power-amplifiers/ps-audio-bhk-stereo-250-power-amplifier-used....If you have concerns about the BHK then ... 
Any Avantgarde Duo owners in Atlanta GA?
Contact for Jimhttp://getbettersound.com/consultation.html