hilde45
Responses from hilde45
| What process did you use to integrate multiple subwoofers for 2 channel listening? @mapman You have to jump ship on the measurements at some point. I’m not sure if you’re giving me this piece of advice, because I mentioned (I thought), I’m going back and forth, measurements to listening to measurements, etc. Better measurements ... | |
| Your favorite audio cartoons @13thsimon It’s definitely not bogged down by subtlety! | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @golfnutz Happily.Working very well in my room:1 REL Sub (further away)Phase: 180Crossover: 100Volume: 7 p.m. (3 tics)2 Rythmik F12SE Subs (both behind and to the outside of each main, but not exactly equally):Both set at:Phase: 180Crossover: 40Vo... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? Update. After a lot of work yesterday, I’ve made good progress. I have no peaks over 4 db, and 4 nulls that are -5-6db and one big narrow one that is -8 db.Scan results are on my system page:https://systems.audiogon.com/systems/9064/editBasics of ... | |
| Need a DAC Recommendation. FYI, the Border Patrol's tube is not part of a buffered output, but part of the the signal path. That might help differentiate it from other tube DACs. | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? Been testing all day, off the computer. I've definitely improved things a lot with systematic adding in of each sub and then doubling the amount of treatment at ceiling first reflection points. I'm now dialing in a variety of room treatments. Be b... | |
| Question about tubes I would go for PSVANE from Good Component instead of JJs.https://www.goodcomponent.com/search.php?Keyword=psvane&CateId=&x=0&y=0 | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @mapman It helped that that room is thin dense carpet pad over solid concrete foundation. No floor resonance issues there like I have upstairs to deal with. If you have those, tackle those directly with isolation pads or equivalent under speakers.... | |
| Need a DAC Recommendation. I love my $1100 MHDT Orchid and I had Grannyring update it. It’s now stunning and we’re at the $1500 total or so.Other DAC choices for me in this range would include Audio G-D, Denafrips, Soekris. | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @mapman -- I'm not against it, absolutely, but want to see if I can make a casserole with what I have and with the skills I have. I've spent a fair amount to have more than decent cables and DAC, so to add something into that mix is not necessaril... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @djones51 In the image I posted yesterday -- which I didn’t label specifically enough -- the orange "morning" line is speakers only.Improvement from "Morning scan, without subs" to "Afternoon scan, with subs" mitigates the dip significantly at var... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @audiokinesis Thank you, thank you! for your help. I'm saving this email and printing it out.Here's the result of my work before your advice, over the course of the day. It's the top slide on my system page: https://systems.audiogon.com/systems/90... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @mapman@hilde45 did I read correctly that your subs go down to 35hz and your mains also not much different in terms of low end extension?Subs go lower than 35 hz. The mains are listed at 35 hz. I do not know their roll off slope. In the past, the ... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @audiorusty So I have a DBA? I was confused because the first post to my thread from went to great lengths to dismiss "integration" and then lecture about DBA’s implying that 4 subs or more were best. I’m not sure if he was defining a DBA as "at l... | |
| What process did you use to integrate multiple subwoofers for 2 channel listening? @golfnutz Updated -- https://systems.audiogon.com/systems/9064/editYou're right! |