hifipf
Responses from hifipf
| Bricasti Model 1 Series II DAC The MDX upgrade was a large step forward. My non SE M1 now is the Series 2. The series 2 upgrade is tighter, leading edge improved , image is more focused as well bigger. Bricasti delivers again and I could not be happier that I took the plunge! ... | |
| SME 30/2 Controller Also unscrew the grounding wire from the post! | |
| Is Tom Evans Still Open Well hope and prayer for audio service is not what I or my brother signed up for. Amazing that company tells you 2 week turn around time, takes payment up front, and then goes dark. Not responding to emails is just beyond outrageous. I’m wonder... | |
| SME 30/2 Controller The only way to deal with it is to order Topping Oil for the dash pots from SME. You will need to fill the pots to the required height (SME can provide drawing showing fill level). The upper section will need to be lifted off. This requires o-rin... | |
| SME 30/2 Controller PG was there are noticeable difference between the 2 controllers? Is so what did the new controller add? | |
| SME 30/2 Controller Confused less suspension Vs increased isolation on increased gap? Which is it? | |
| SME 30/2 Controller I have already taken the sub-chassis apart to see where the fluid came from. I think I can get enough gap with a syringe and a rubber hose end to add to my dash pot. Regarding height and isolation no clue! I’ll just set it to the spacer level. ... | |
| SME 30/2 Controller Platter color is if no significance. The mat is exactly the same material. | |
| SME 30/2 Controller Thanks for the info Tobermorey. I got the fluid ordered only a small amount leaked from 1 dash pot and the instruction for proper level of fill. My serial # is older but I have grey platter. I am waiting on my Rosewood Sig to be rebuilt. I hope... | |
| SME 30/2 Controller SME did contact me and I got it straightened out. They do call the suspension system dash pots. I have the fluid on order and a diagram for fill height. The power/controllers are not being sold as upgrades. I guess I am using the original. ... | |
| SME 30/2 Controller Update : if you don’t lock the sub chassis down the suspension dashpot does not seal. As a result the dampening fluid leaked out and ran down the chassis onto the supporting feet. I removed the sub chassis cleaned up all the mess. The issue is... | |
| SME 30/2 Controller Update on fluid leak. After studying and thinking long and hard,I think I know what happened. When sub chassis was raised to its limits and released quickly a little bit of oil due to the sudden pressure of the quick release was forced out. After ... | |
| SME 30/2 Controller The sub chassis was not locked down in transport but the it was lowered all the way down. As a result hydraulic fluid present. Everything else is fine. Bearing dead quite with stethoscope and motor no issues. Any guidance on fluid leak? Cleaned ... | |
| SME 30/2 Controller So, I discovered a little bit of the hydraulic fluid at base of the pillar. Is this a big issue and if so serviceable? No reply from SME. I have now sent 4 inquires. I have never had this poor of service from a company so, I’m at a loss of wor... | |
| SME 30/2 Controller Thanks everyone for your input. I am looking forward to listening to 30/2. The guidance you’ve all given me has helped ease my mind. I will use the existing controller as it seems buying a newer version yields few improvements. Looks like all th... |