hiendmuse
Responses from hiendmuse
| VPI Classic 3 + 3D Tonearm SRA Adjustment issue Isaacrivera, from your photo your tonearm is not as high on the pivot end as I had imagined. I found for both the JMW 10.5i and 3D arms that the CounterIntuitive device made adjusting more difficult, so I did without them on both arms. Regarding t... | |
| Airplane trip with turntable... If using a VPI Traveler table you shouldn't have any problems ; > ) | |
| VPI Classic 3 + 3D Tonearm SRA Adjustment issue I have a Super Scoutmaster Ref. rim drive and recently installed a 3D tonearm to replace the JMW 10.5i arm. I use a Lyra Titan-i cartridge. I have found that both arms sound best when parallel to the platter. I use the Classic platter. I recall re... | |
| New VPI 3D Arm I finally installed my cartridge onto the 3D tonearm for my Super Scoutmaster Rim Drive Reference table with Classic platter. I drove to VPI (about an hour from my home) and they helped get the right counterweight and made a few preliminary adjust... | |
| New VPI 3D Arm Mat emailed me late last night and said there are different clearances between the black and silver color towers, so I requested the black VTA tower instead of having the side azimuth weights shaved down. Also, the 180 gram counterweight specified... | |
| New VPI 3D Arm Well, I started to set up my 3D tonearm and ran into a snag. After installing the new tonearm bearing and tonearm rest, I found that the azimuth weight on the left side of the arm hits the VTA tower- there is not enough clearance between the tonea... | |
| New VPI 3D Arm Great Service- thank you Mat!!I just received the new counterweight this morning before 10am from VPI which was Fed Ex'd overnight. Now I have the latest 180 Gram counterweight with fine adjustment and CounterIntuitive installed for my new 3D arm.... | |
| New VPI 3D Arm Hi Mat,Thanks for your response. We spoke yesterday (my name is Gary). We also talked about a different platter and bearing.How long will it take to machine a new 180 gram counterweight to fit the 3D arm and also accommodate the CounterIntuitive? ... | |
| Most compatible phono pre for Lyra Delos Great choice! I use the GS Slee Reflex with a GS Elevator for my Lyra Titan-i. Beautiful sound. | |
| New VPI 3D Arm Mat emailed me very early this morning (2:30am) after I sent my last thread immediately responding to my email to Harry and said he will be sending me a new counterweight for the 3D arm on Monday. I have found that VPI offers very good customer se... | |
| New VPI 3D Arm I received my new 10" 3D tonearm. Unfortunately the 180 gram counterweight that came with it apparently is the type for the thinner metal JMW tonearm- the opening is too small to fit the thicker diameter 3D tonearm. The thumbscrew that came with i... | |
| New VPI 3D Arm Stringreen I agree, it would be much more convenient if VPI had devised a quick release for the anti-skate from the tonearm instead of having to remove the counterweight and completely readjusting- a complete waste of time to check anti-skate vs. ... | |
| New VPI 3D Arm Stringreen, are you using the anti-skate device with the 3D arm? | |
| New VPI 3D Arm I got a Counter Intuitive for my 10.5i tonearm but found it would not adjust properly when using my Fozgometer- the readings were very erratic. When I removed the Counter Intuitive from the counterweight I was able to adjust azimuth and got much m... | |
| New VPI 3D Arm Anyone set up cartridge with redesigned counterweight for the 3D tonearm? If you did I'd like to know how it worked out overall. Thanks. |