hdm

Responses from hdm

You got to show me something more!
Originally posted this in the JAZZ on PBS thread, but this is where the action seems to be-I'll just paste the post in here: I'm a little late to the party here and in "you got to show me" thread but would agree with many of the "live and let live... 
Ken Burns' JAZZ starts Monday on PBS!
I'm a little late to the party here and in "you got to show me" thread but would agree with many of the "live and let live" posts. I think, however, Coltrane, that you're engaging in some serious historic revisionism when you state above that rock... 
the best CD player under $1k?
I would think twice about spending $1000 for a CD player based on my recent experience. IMO, you should investigate some of the budget DVD players I'd probably look at the Pioneer DV-333) with the view to doing some very inexpensive tweaks relatin... 
Looking to build power cords.
The Audioasylum recipe uses Belden 19364, which you may find difficult to find in smaller quantities (say less than 100 feet). A division of Belden (Volex) makes a pre-terminated cord, the Volex 17604 (search for Volex on line-easy to find them an... 
diy power cord: Shinyata black mamba
That would be a pretty expensive DIY project. 
Smart Analytical Geek Required
I may be wrong, but I don't think so. On a 16x9 widescreen, letterboxed movies shot in a 1:85:1 aspect ratio WILL fill the entire screen while those shot in 2:35:1 WILL NOT. On 2:35:1 movies, even with a widescreen you will still have the black ba... 
help with power cord
Do an on line search for Volex and buy a Volex 17604 cord (14 guage, shielded) for about $10. Then buy a Hubell 5266 male end for about $7 or $8 and a good quality iec. (I used a Bulgin-cost $5 in Canada) but Schurter is another one with a lot of ... 
Pioneer DV 05 Mods and Tweaks
Rick: Forgot to mention in my first post, my player also responded very well to isolation-I use vibrapods and sandbag the top of the player-there are more sophisticated (and expensive) alternatives, but this type of isolation works well for me. I ... 
Long runs- digital or video
S-Video is supposed to run into signal loss after 15 feet, although I run 21 feet without too much problem. Other cabling is probably less prone to signal loss than s-video, so if you can, run longer lengths of others and shorter lengths of S if y... 
Pioneer DV 05 Mods and Tweaks
I don't own any movies so I can't comment on improvements to video performance, but the audio performance on my DVD player (not a Pioneer) was improved immensely by the following. Take off the lid and fasten industrial floor tile (80 cents each at... 
S-Video Cable - is there much difference
Have to admit George, I've been impressed in the past by your lack of pretentiousness-you seem to be a no BS kind of guy and I like that. What S-Video cables are you using currently? Can you return the Monster if they don't work out? I honestly th... 
S-Video Cable - is there much difference
I recently switched my system around and had to go from a 1 metre S-Video cable to a 7 metre run, which is supposed to be very bad. I was using Monster M1000V, which, at the time was the top of the line Monster, and ended up going to the base Trib... 
CD player:Arcam 9 or Rotel 991
If you're thinking of the Arcam, wait, as it's about to be discontinued and replaced with (according to Arcam) a better sounding player at the same price. 
Know of a "Dirt Cheap" tweak?
Had a brief "thread discussion" with Dekay on this about a week ago and decided to try it as my CD player went out of warranty about a month ago. Go to Home Depot and buy the industrial vinyl floor tiles (3 at about 80 cents apiece). The industria... 
Mapleshade Vibration Control
Dekay: Some interesting posts at Audioasylum about internally damping the chassis of CD players with good results-some different materials mentioned-can't actually recall but I believe one of the materials is quite commonly used in car audio insta...