georgehifi
Responses from georgehifi
| Tube Pre+ Transistor Power will burn your power Amp. easily? Short answer = Tell him he’s dreaming!!Long answer = Tell him he’s dreaming!!Bet he's a fuserCheers George | |
| Tube vs Solid State Modwright KWA150SE The 800D/2/3 are a bit of a vicious load not just in the bass which can get down to an "EPDR" ( equivalent peak dissipation resistance) of around 1ohm, but also in the 8khz which can get to an EPDR of around 3ohms.http://www.st... | |
| Synergistic Red Fuse ... The mods need to take a look at this.Isn’t it funny that whenever legitimacy or safety issues are bought up about fuses, they get swamped by non off topic posts about the latest cd/music, fm radio, books etc etc to hide those issues from the gulli... | |
| Is dac variable output worse than fixed? what would I set the back settings to on Gain: 1.5 (3db) or 6 (15.6db), selectable via rear switch. Which ever one gives you the most usable range of volume with, min to max.Cheers George | |
| How do I power my 800D(3)s For reference I really like the Lynn product, but it is VERY expensive Matt Great amp but knowing and having worked on them, NO, not for these loads that these speakers represent. Between 60hz and 1000hz especially at 70-90hz.http://www.stereoph... | |
| Synergistic Red Fuse ... People who play stupid games get stupid prizes. And playing the fuse game, get the the biggest stupid prize, because not one Audio Tech with any cred will play that snake oil game, unless they have no cred and are in it for monitory gain.Cheer... | |
| Is dac variable output worse than fixed? I'm not up on this stuff but from what I can see the Ido is a headphone amp 2v out with built in dac, if it's output is to low for the 38ohm 89db he500's, the get a $99 Schiit Magni 2 much more powerfull it's output impedance is .2ohm, Gain: 1.5... | |
| Is dac variable output worse than fixed? You need to give more info, dac model, current setup models, headphone model, which Schiit model ect.For any constructive answers to be given, otherwise you'll just get a lot nothing posts.Cheers George | |
| Synergistic Red Fuse ... +1 Wolf, And with other technically adept audio techs, who couldn’t even be bothered with even reading this thread, with the voodoo snake oil that’s presented here. That’s why it was never presented in the "Tech Talk" forum, as it would get shot d... | |
| Synergistic Red Fuse ... andynotadam64 posts Only 64 posts and 53 of them on SR fuses. And they all started just after the SR fuse thread started. Good work contributing to audio in general on all these forums. Blind Freddy can see what’s going on here.And good on you ... | |
| Synergistic Red Fuse ... Bait for the sake of safety? I hardly think so. As I said. " As most here don't know if they're changing an ac mains fuse, dc rail fuse or speaker protection fuse. Maybe we've saved a future life, or at least a piece of equipment."No one, unless ... | |
| Synergistic Red Fuse ... So my basic intention is to provide food for thought, rather than advocacy So your not advocating, increasing the fuse amperage from the manufacturers specified value/s. This is good Al, for the sake of safety. As most here don't know if they'r... | |
| Synergistic Red Fuse ... You need to answer this question Al, for safety sake, as many here hang on your words. Are you or are you not advocating that anyone else replace a manufacturers given fuse value with something higher, especially if they have no technical backgrou... | |
| Synergistic Red Fuse ... But surely your not giving the go ahead to other to do it as well, as it is mains safety issue were talking about. Al, your your silence is deafening, are you getting splinters?Cheers George | |
| Synergistic Red Fuse ... See the mods have seen fit to delete the voodooists posts that were sticking it to Wolfy, for preaching the safety aspect that’s been grossly overlooked by the fusers, or maybe they are also starting to see the truth/fact behind this snake oil.Che... |