fosse
Responses from fosse
| Kuzma 4 point and SME 20 Thanks Amater, I will.What turntable would you recommend Audiooracle? | |
| Anti skating SME V Hello Jfrech. That's just the angle, it's a standard SME 20/2 with SME V-Detachable. | |
| Anti skating SME V Thanks a lot Dougdeacon and Peterayer, this was great reading.Audioquest4life: You can get the SME V with a detachable headshell. This will make the arm less rigid of course, but the advantage is you can adjust aziumth (and take of the headshell w... | |
| Anti skating SME V Thanks a lot everybody. The table is in level, and I have adjusted the suspension to make sure sub chassis, top chassis and platter is in level. I will try to lower the stylus closer to the first track, the thing is I have never had this issue on ... | |
| Phonostage for Jan Allaerts MC 2 Finish Gold. Oh, here's a lot of interesting phono stages.I have also got a tip about the release of a "premium version" of the Liberty Audio phono stage.Anybody who has heard the standard version of this one? | |
| Phonostage for Jan Allaerts MC 2 Finish Gold. Thanks Pcosta.What do you think of the Basis Exclusive in this setting? | |
| Phonostage for Jan Allaerts MC 2 Finish Gold. What about the Raven Phono stage, could that be something? It's reasonably priced, all tube - no transformer, impedance to order and three inputs. | |
| Phonostage for Jan Allaerts MC 2 Finish Gold. The hum is all gone, I had the Einstein The Turntable Choice placed to close to the Hovland or some power cables, moved the phonoe stage into the window post and it is as quiet as anything I have heard. I have read about the Isenberg, but I think ... | |
| Einstein The Final Cut vs. Graaf GM20 Mono I ended up not buying the Einsteins, the Graafs simply outperformed them in my setup. The Einsteins sounds thin compared to the Graafs. | |
| Avid acustus reference vs TW acustic raven AC3 I have an Acutus (ordering a new Acutus Reference these days) and find it difficult to understanding your problem with footfall. I have a suspended wood floor as well and have never had any problems crossing the floor, even if I can see the turnta... | |
| Einstein The Final Cut vs. Graaf GM20 Mono Sure Pubul57, the problem is that I'm living in Norway and there is no dealer for Joule og Atmasphere here. I can buy from outside Norway but then I have now chance to hear the equipment at home before buying. I have decided to try the Einsteins a... | |
| Einstein The Final Cut vs. Graaf GM20 Mono Thanks a lot Audiofun. The Modena is the same amp as GM20 (just an other color) so this is nice to know. You say "the Einstein amp". Was it The Final Cut? OTL mono amplifiers? | |
| Running an External Phono with a Hovland HP-100 I have used the HP-100 with a wide range of step-up transformers and active units. In my opinion the sound varies just as much with change of step-up device as with a different phonostage. I bought the MM-section for greater flexibility with an ou... | |
| M A Cotter MK-2 transformer differences? I have some scematics but they don't match the service-manual I found on vinyl engine.The Cotter MKII have 5 pins horisonataly (1-5) and 4 pins vertically (A-D). Mine is wired like this:A1+A2,A3+A4B1+B2+B3,B4+B5C2+C3,C4+C5D1+D2,D3+D4+D5+ meaning t... | |
| Avid Acutus - help with flying belt Do not level the player by adjusting the towers (this will set the player in a different plan than the motor), instead make sure the platform is in level. Make sure the platter is in level with the subchassis (watch the three black inserts in each... |