ervikingo
Responses from ervikingo
| Air conditioning for audiophiles. A friend has one of those saddle type AC as suggested by @nonoise . It is pretty quiet. He said the added larger rubber bumpers to get a tight fight. I have seen at working garages, where they have a unit far away and they "pipe" the cold air u... | |
| Could we get a group of all IRS Beta owners? So my son asked to use my system. I walked in and found him on a folding chair set dead center and about 2 feet closer to the speakers than my seating position. He suggested we reduce toe in, the mid/high are almost straight, bass towers are hid... | |
| Powercord for Infinity Reference Standard RS II-B EQUALIZER Is the light turning on (on the Servo Controller)? I have had issues with other equipment where the PS is working but not providing all the power per specs. You could change the power port for a modern locking version. I suggest you post your c... | |
| Internet Noise: A Pest in the Machine @waltersalas In my case, I used a "ground lifter" on the incoming coax. Can't say I noticed a change but I had no issues. https://www.amazon.com/dp/B08FRGH4X2?psc=1&ref_=cm_sw_r_cp_ud_ct_2Z5MM0TACZ9T4KCQ3QHK | |
| Could we get a group of all IRS Beta owners? @stephens770 "I've got an intermittent noise issue with my amp" ???? Have you figured this out? Anything you can share to see if collectively we could help? | |
| Could we get a group of all IRS Beta owners? So what do you guys think of modifying the crossovers (not replacing aging parts with similar specs)? | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? http://www.infinity-classics.de/technik/manuals/Kappa_9_technical_sheet.pdf | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? @richardt9000 Before you go into too many crazy steps, swap speakers left to right and see iof the particular noise stays with the speaker (to rule out a system problem other than the speakers) | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? @waytoomuchstuff thanks! what is the “no desoldering method”? thanks | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? Cool! | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? @ross6860 i hear ya. That’s why I have not messed with mine. Just visual inspection and sticking my ears to them. regarding your other question; I have no idea but it would be nice if it worked. | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? @ross6860 is there a way to measure the drivers accurately without de-soldering the wires? I have assumed that connected you might be measuring the driver and the crossovers. (Accountant here not engineer 😜) | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? BTW I can hear my S-EMITs. Get up close and they are sparkling | |
| Infinity Kappa 9 S EMIT not functioning or Hearing Loss? @richardt9000 hi! on the component side of things (not your hearing) clean the pots, look at the crossovers to make sure everything looks OK. Speaking from experience with my betas. I could trace a situation with mine and I thought it was my... | |
| Could we get a group of all IRS Beta owners? @stephens770 thanks sir! (this forum needs a like button!) I ran the mid highs with VTL Manley Ref 100/200 and later VTL Manley 225. Bass always with the Thresholds. If memory serves me right the Wavelet was a Dac/Crossover? |