ervikingo

Responses from ervikingo

Could we get a group of all IRS Beta owners?
wow, that was quick.  Good for you!  
Could we get a group of all IRS Beta owners?
@stephens770 I can't find your thread.  Send me details ;) and location.  Also if you have spare parts, i'm interested  
DSP dirac test error ‘low signal to noise level’
Did you ever find a solution? Having the same issue  
Air conditioning for audiophiles.
Back to Vornado as an FYI for those considering one (measured 24 inches away from side of fan): - room noise with fan off: 31.7dB - Low: 41.8 - medium 1: 48.1 - medium 2: 54.9 - high 61.6 measurements with a NIOSH meter.  
Air conditioning for audiophiles.
A friend has one of those saddle type AC as suggested by @nonoise .  It is pretty quiet.  He said the added larger rubber bumpers to get a tight fight. I have seen at working garages, where they have a unit far away and they "pipe" the cold air u... 
Could we get a group of all IRS Beta owners?
So my son asked to use my system.  I walked in and found him on a folding chair set dead center and about 2 feet closer to the speakers than my seating position. He suggested we reduce toe in, the mid/high are almost straight, bass towers are hid... 
Powercord for Infinity Reference Standard RS II-B EQUALIZER
Is the light turning on (on the Servo Controller)? I have had issues with other equipment where the PS is working but not providing all the power per specs. You could change the power port for a modern locking version. I suggest you post your c... 
Internet Noise: A Pest in the Machine
@waltersalas In my case, I used a "ground lifter" on the incoming coax.  Can't say I noticed a change but I had no issues.   https://www.amazon.com/dp/B08FRGH4X2?psc=1&ref_=cm_sw_r_cp_ud_ct_2Z5MM0TACZ9T4KCQ3QHK  
Could we get a group of all IRS Beta owners?
@stephens770 "I've got an intermittent noise issue with my amp" ???? Have you figured this out?  Anything you can share to see if collectively we could help?  
Could we get a group of all IRS Beta owners?
So what do you guys think of modifying the crossovers (not replacing aging parts with similar specs)?  
Infinity Kappa 9 S EMIT not functioning or Hearing Loss?
http://www.infinity-classics.de/technik/manuals/Kappa_9_technical_sheet.pdf  
Infinity Kappa 9 S EMIT not functioning or Hearing Loss?
@richardt9000  Before you go into too many crazy steps, swap speakers left to right and see iof the particular noise stays with the speaker (to rule out a system problem other than the speakers)  
Infinity Kappa 9 S EMIT not functioning or Hearing Loss?
@waytoomuchstuff thanks!   what is the “no desoldering method”?   thanks   
Infinity Kappa 9 S EMIT not functioning or Hearing Loss?
Cool!  
Infinity Kappa 9 S EMIT not functioning or Hearing Loss?
@ross6860 i hear ya. That’s why I have not messed with mine. Just visual inspection and sticking my ears to them.    regarding your other question; I have no idea but it would be nice if it worked.