elliottbnewcombjr
Responses from elliottbnewcombjr
| Does Every Track Sound Great on Your System? 12many OP Some bass great, other bass bad: It’s your space then, certain bass frequencies (or their overtones), not all, are causing problems, becoming stronger/weaker/mud by the mix of reflections of those/some specific frequencies. I would try... | |
| Anyone listen to entire albums? a few thoughts 1. those albums (vinyl or cd) where the order of the songs is different than the printed order? who made those decisions? 2. cd's. I sometimes use scramble, and found I became focused on songs that I was not fully aware of, strang... | |
| Wire break-in safe without speakers? Are they directional? More BS IMO. | |
| New Dedicated 20A Circuit Wiring Questions IMO. 15 amp is plenty, 20 amp is overkill. Two 15 amp separate circuits, in two convenient locations is smarter IMO. 1.0 amp slo-blo Fuse of my McIntosh mx110z Tube Tuner/Preamp. 3.2 amp slo-blo Fuse of my Fisher 500C Tube Receiver 6.3 amp Fuse... | |
| Record Store Day 2024? I’m no fan of Record Day. No way in hell would I wait in a line to get anything, go in a crowded store, especially a crowded record store, and I buy what I want, not whatever they choose to promote. Oh yeah, did I mention I don’t like people muc... | |
| SUT help lewm how is the .05mv increased to MM signal strength? Active Gain, signal not stepped up? | |
| How to Upload Photos in a post? lately I use 'virtual systems' here, upload a pic, then it's online, simply open it, copy address, paste. also loving using the link feature (top line, looks like a paper clip. window opens, paste the url, then name it yourself, it goes in as a s... | |
| how to remove a woofer from b@w801n I forgot the link to the connector kit | |
| SUT help Just as the OP said, SUT discussions are like drunken sailors, but remember, they get where they are going, usually. | |
| Tonearm resonance are these issues always present on your support system? It is possible a combo of solidity and anti-vibration is needed. my final solution was adding isolation blocks between my heavy turntable and very stable equipment rack I was dealing with... | |
| Does Every Track Sound Great on Your System? IF your system is capable of sounding great on some tracks, bass/mids/highs and not others, it’s the fault of the recording, not your system. musicians, placement of musicians in a space, specific mics used for individual instruments/voices, prop... | |
| Anyone listen to entire albums? I was just laughing to myself about this. Went to change tracks yesterday, forgetting it was an LP. LP’s, usually all the way thru, and I definitely want the original order. I like extra tracks as long as they are added at the end (CD or LP). Re... | |
| how to remove a woofer from b@w801n Not familiar with the connectors or if soldered connections. IF you need to cut the wires, pick a spot that allows easy re-connect, and arm yourself with a connector set. Bullets allow connect/disconnect, and are a good way to add some extra wir... | |
| SUT help lewm not quite, I can compare MM with or without the SUT, I can only hear LOMC via the SUT. ""My different MM Cartridges, their differences similarly heard passed thru SUT or direct to mx110z’s MM Phono as above. MC, the story is the same when ... | |
| SUT help pindac nope, nope, nope ...... nope. Passive, Straight Wire With Gain, ZERO noise: that’s what my Fidelity FRT-4 SUT is. MM Passed Thru it to my mx110z or MM straight to my mx110z’s MM Phono sound the same. I love the sound of my mx110z’s MM Ph... |