ecir38
Responses from ecir38
| Nude Turntable Project Aigenga, looks be just a iphone app. I have a droid OS, was thinking if others do try it would be best to use same software. Have to say I would be skeptical of accuracy of an app for this application. The one I tried was finicky. | |
| Nude Turntable Project Aigenga, what's the exact name of the app you are using? | |
| Nude Turntable Project Banquo363, you beat me to it. BTW thanks for the report of trying your table without the tin can. | |
| Nude Turntable Project The problem I see with the post connection is if anyone has fooled with them in the past the leverage from the post will have a tendency to move the eyelet on the other side if done without caution. I would unwrap then rewrap with less turns and r... | |
| Nude Turntable Project Yes those post are soldered on the other side and are used in that fashions so as not to have to remove the pcb to service other conecting components. To me this is a prime example of a reason to service the bearing of the motor, nothing last fore... | |
| Nude Turntable Project Lew, I think what Banquo is talking about is that wires that go from one board to the other are fastened by wire that is just wrapped around a stud that is soldered to pcb. This is a known problem and should be addressed if it hasn't been already.... | |
| Who needs a MM cartridge type when we have MC? Raul, you seem to contradict yourself depending on the subject to your benifit. You agree that the THD wars with solid state amps didn't always provide a better sounding experience. When Lew argued in the Copernican View of the Turntable thread ab... | |
| Nude Turntable Project Nice one Richard, makes pefect sense to me. Something I will keep in mind for future projects. I have always found it difficult to find adjustalbe footers for turntables to my liking. I like the ones that trans-fi makes that I use on my garrard bu... | |
| Nude Turntable Project isolated/decoupled or coupled. Chris looks to me you have the best of both worlds on your SP10. As a basis a table that uses pods I would couple, a table with fixed armboards I would decouple. But nothing is fixed in stone since it would be hard t... | |
| Nude Turntable Project Halcro, on the backside I have a slot routered out for ventilation and a IEC receptacle for convenience.Looking at a couple more weeks. Have to make top plates and drill and tap a bunch of holes for footers, top plate. Also waiting for another MA5... | |
| Nude Turntable Project if they aren't tight, sorry | |
| Nude Turntable Project Nice job Halcro. How tight are the threads on those spikes? My experience thinks you need a jam nut and they aren't tight.A couple of pics first implementation of soon to joining the TT club. http://i61.photobucket.com/albums/h69/ecir38/Arm%20Pod/... | |
| Who needs a MM cartridge type when we have MC? Thanks Halcro. | |
| Who needs a MM cartridge type when we have MC? Lew, to give you a visual. I have the material to make three pods. The plinth will be a CLD round one only a few mm's larger than the OD x the 3.5" H. Both would be coupled by the same footers. This will be easy for me to build and will give a pla... | |
| Who needs a MM cartridge type when we have MC? Thanks guys, for the record the TT71 is 2.75 inches. On another note the outside diameter is slightly larger for the 81 101 compared to the 71. The Vintage Knob specs look to be right for that dimension. Thanks again for the quick replies. |