danner
Responses from danner
| What size subwoofer to get? Slightly different advice:1. A floorstander's low frequency (in this case 35Hz) can be expected to be its -3dB point (unless you're quite close to a wall). The crossover on a sub is its -3dB point. Therefore, a crossover point an octave above the ... | |
| Cheapo interconnect for sub only DH Labs makes a cable called 'SubSonic' for this purpose. A pair of 5m cables is $85 including shipping from ACI.www.audioc.com/accessories/wire2.htm | |
| Your ONE all time favorite love song? Wonderful Tonight by Eric Clapton. | |
| Need Advice: Which Headphone Amp? Headroom - SS sound; crossfeed optionASL - good value tube soundDavid Berning - headphone heavenAll three of these work well with Sennheisers - it depends on your taste and budget. I have all three but the microZOTL is by far my favorite, then the... | |
| Which components knocked you out on first listen? ART DI/O with Sennheiser headphones driven by a David Berning microZOTL. | |
| Merlin Speaker Placement My experience is essentially the same as Tubegroover's. Personally I prefer mine with a backward tilt. They're very sensitive to the slightest changes. | |
| Difference between tact rcs2.0 and 2.2x I have an RCS 2.0 that I use with a sub. I set it up as one would without the RCS (position, phase, and amplitude) and then used the correction on the whole system. I'm happy with the results. -- As to its use as a preamp, I compared the internal ... | |
| Speaker that I use the AES SE-3 and AES SE-1 with Merlin VSM-Ms and love the combination. Welbourne Labs lists the Merlins as SET friendly and I've found this to be true. There are several VSM-SEs and VSM-Ms currently on Audiogon ranging in price from 1950 to ... | |
| Why vinyl? I've tweaked my CD-based system to where (to my ear) there is a rich and warm midrange with no harshness or glare (so long as I don't do a direct comparison to vinyl). Like Kthomas, I ride the happiness of listening to the music and have let go of... | |
| My wife says yes Help what to upgrade next? Gregm was right on. Start with power cords and consider a power conditioner. Something like an Ultimate Outlet with a thirty day return policy from PS Audio might work. Then interconnects and spkr cables can fine tune the foundation you've provide... | |
| Your Favorite Austin City Limits It's got to be SRV! | |
| Best Buy or Good Value in a Transport CD I replaced the laser transport mech in my Delta and had it modified by Dan Wright at ModWright. Total cost including shipping was about 500. Couldn't be happier. | |
| Does anyone actually rackmount ????? Nearly everything in my project studio is rack mounted. Nothing in my listening room is rack mounted. It's principally a matter of space. There's so much gear in the studio that without rackmounting it would take way too much space (not to mention... | |
| Are we music lovers or gear lovers? We're both. Audiogon principally provides a place to buy and sell hardware and some software. It also provides (luckily for us) a forum where we can exchange information that may be useful in creating our own collections of hardware and software. ... | |
| Best speaker for a SET 5 watts per channel Check out Welborne Labs list of recommended speakers for SET amps at: www.welbornelabs.com/recomendspeaks.htm |