cytocycle

Responses from cytocycle

RUsh: Feedback ep
Great album, only I bought mine for $7.98 at Target last week. 
Phantom mode for DD ot DTS
EAD processors (stay away from the Encore, single bit processing, lacks resolution, Ovation or higher is much much better) and Meridian 565,561,and up will support this.Most good pre-amp processors should support this.You're speakers image extreme... 
Speaker Wires on Carpet
I had static problems in Colorado in the winter with my carpet there. I saw a tweak suggestion of spraying anti-static spray on the interconnects/speaker cables and it made a noise reduction in my system.I bought the cable isolators but never did ... 
Which preamp to pair with Moon W5 amplifier?
Stehno - Interesting comment about lack of bass, I had that problem when I bought my W5 based off the reviews. I had no BASS with my Audible Illusions L1 preamp (tube). After two weeks I returned it to the Dealer and Bought an EAD PowerMaster 2000... 
New Lamm M1.2 vs. M1.1
In response to MikelavigneMy Lamm M1.1s don't have any problem controling of providing high output with my Wilson Watt Puppy 7's. Remember these are a nominal 4ohm speaker (they don't dip below 3.7ohm) and they are 93-94db efficient. I don't know ... 
EAD TM 8000 or Theta Casablanca I standart dacs
Why what's wrong with your Meridian, that's an excellent piece? The EAD will be more musical for 2 channel. I think you would only benifit with the Theta if it had Superior DAC's in the fron 
VGA cable length
www.pccables.com I have run their 25ft, 50ft, and 75ft VGA cables without ghosting.. all are available for less than $30! www.avsforums.com recommends these guys. I also used a 50ft VGA to RGB (5 BNC ends) and added 3 BNC to RCA adapters sold also... 
state of the art home theatre....
Niles In-wall speaker 8700 model with the alum/ti 8" bass drivers! Pretty amazing speakers for in walls.Ceiling speakers SUCK.. but WAF love them.in-walls are Designed for WAF. 
Pass X Series Preamps with JC-1 Monoblocks?
Pass equipment will benefit from using balanced Cables. 
What sub do "U" use ?
Velodyne F1800X for moviesNone for my Audio System (a Big Rel, Wilson Watch Dog, Velodyn DD18 would be nice but I'll probably save up and Wilson Maxx's instead) 
Please rate WATT/Puppy 7
After 5 year of listening and traveling to dealers this is what I found does and doesn't work. I am now a WP7 owner.Wilson synergy that I didn't like (Classe, Krell, Mark Levinson) any type of silver cable YUK or Audioquest or monster yuk .. High'... 
Personal amp evolution
Sony Reciever from DadNikko Seperates 1st year in collegeHafler DH500 and then a second DH500 to bi-ampSumo Andromeda II (no bass, bad ground humm interaction)ARC Classic 60 (Liquid music but no bass on my Magnepan IIIa')Music Reference RM9 (shoul... 
Amplifier and preamplifier for Wilson Watt puppy 7
Ok, here it goes...I've heard you front end on Maxx's with Halcro using Transparent Reference XL cabling and it was one of the top 3 systems I've ever heard. So your front end is not lacking Depth.In Response to Cellorover - No the WP7's aren't at... 
Manley Reference 350
I used VTL300's powering a pair of Magnepan IIIa's (84dB efficient) for a while and that was plenty of juice but the magnepans are a solid 4ohm load speaker, I understand that some of the Revel's drop to 2-3ohm load and that will be really hard on... 
Wilson MAXX II speakers-
Maxx's are like 94 db efficient so you don't need much power