cpk
Responses from cpk
| Unconnected Drain Wires ? Hi Tony,My suggestion would be turn off breaker feeding that outlet then just disconnect the ground at the receptacle. You could do it at the AC plug but I dont think you want an unconnected ground wire flopping around in the plug body. Hey what ... | |
| Revel Salon 2 vs. Revel Studio 2 on a suspended wood floor the lighter speaker will work better, go for the studios... | |
| Unconnected Drain Wires ? Hi Jim,What I make of it is everyones system and situation is different. If the weren't it would be much easier to design a line of cables that work well in all cases. For example Mr. Hansen of Ayre fame IIRC runs with all the grounds lifted on a... | |
| Unconnected Drain Wires ? Hi Jea48,Since that is not my company I luckily don't have to explain it ;-), maybe they like the radio stations in Poulsbo, WA? I have heard before that that is how those lower end shunyatas are configured but I was unable to find that actually s... | |
| Unconnected Drain Wires ? Disconnected drain wire is not a safety hazard but it is not a good idea as the now floating shield will act like an antenna. If you are using a shield design always connect the drain at the wall side only. | |
| Is there a better table than S. Scoutmaster Ref ? sp10 mkII in a good plinth...better | |
| I ask again, has anyone heard the Tempo El.Preamp? a bizarre, incestuous worldDamn Grant, I thought that was somebody cute and non-related blow'n in my ear.... | |
| Jadem6 stumbled... but hasn't fallen. Yet. That's not good news...I hope for the best for him | |
| Ben Harper help... The will to live & Fight for your mind are my favorites... | |
| VTL 5.5 or Aesthetix Calypso My experience is with fully modded SF Line2SE+ and then moving to a JC2 which with those amps was all around better. I am not missing the tubes (amazingly) not sure that this helped but might be something to think about.... | |
| DIY speaker wire: does insulation matter? That's magnet wire, it should be enameled, just use it as is, you are good to go. As for dc < 2 is good.Good luck, have fun, & happy listening! | |
| DIY speaker wire: does insulation matter? From what you have written it seems that you are planning to use a un-insulated wire that you have and insulate it. Not a good idea. First there is already a layer of oxidation on the copper if it is un-insulated, second whatever you put on most l... | |
| DIY speaker wire: does insulation matter? Cotton is a terrible suggestion as a dielectric for a copper conductor. Untreated cotton will absorb moisture from the atmosphere and allow unabated access of the atmosphere to the conductor. In the form that you will be using it in it's dc is a m... | |
| Parasound JC1s better using balanced inputs? I run mine balanced. I used a few tube pre's and ended up with a JC2 and really do not miss tubes at all... | |
| Upgrading the drivers on my old Definititive bp8 if you want better speakers, sell the def's and buy something else. I could go into all the reasons it is not a good idea but pretty much there is a 100% chance that anything you 'drop in' will give you worse sound regardless of driver cost. |