brf
Responses from brf
| tube amp not turning on Not plugged in, fuse, breaker, faulty cord, bad oonncection...... | |
| Do not buy any Sonus Faber used Not sure if this applies to SF, but I once read that of one US distributor that would not service products that were not imported into the US by themselves. He argued that he has invested in the US distribution and set up a dealer network, provide... | |
| Berning ZH-270 Grill / Cover Use Google images and enter "screw bits". Match the image with the actual screw. | |
| Outer Perimeter Ring power demands This does not sound right. I would say that your SDS is defective. A quick call to VPI will give you the right recourse. | |
| How a nickel can make a valuable improvement I agree with Markpoa, use brass fender washers between the the feet and the plinth. | |
| Foam plugs for Proac Response 3.8? A touch of Loctite Blue 242 will prevent the bolts from backing out due to vibration. Ask the manufacture for proper torque settings for the bolts. | |
| Thoughts from Joule preamp owners? I would also take a look at the Cary SLP-05 | |
| Thoughts from Joule preamp owners? If your system needs a bit more warmth and a more fleshed out lower octave, then the Joule will be the ticket. When I had Merlin speakers, I too mated them with a LP150, and the Merlins benefited from the added warmth and bass drive. Great combin... | |
| Decent cartridge for Linn LP12 with Ittok LVII I like ALL of Stanwal's recommendations, especially the Mose Hercules and Sole sub chassis. The AT OC9 is a proven cartridge for the Ittok. | |
| Which MC for my setup? Dynavector 20x2 | |
| LAP-150 MkII - How good is the phono stage It is a very nice sounding phono stage and is voiced similar to the rest of the Joule line i.e. very lush midrange, good bass, and full sounding. Not as detailed as some other phono stages. I have no expereince with the SE version. | |
| VPI connections. VPI doesn't have any in stock and neither does Elusive Disc.VPI is a small company and with a lot of their accessories, when they run out, they need to wait for sufficient orders to accumulate before they can justify the manufacturing/ordering rep... | |
| VPI connections. I can understand why VPI won't "send" you one but I bet they will "sell" you one. | |
| Getting hooked on 12" 45 rpm reissues I love 45 LP but I find them very inconvenient to use. | |
| How is the Speakon connector wired for REL sub? The Neutrik Speakon plug pin configuration is as follows:-The pins in the Neutrik Speakon plug are numbered 1+, 2+, 1- and 2-1+ connects to the right hand speaker red terminal at rear of amplifier or speaker2+ connects to the left hand speaker red... |