How to fix a lack of bass Null

Mounting anthing vertically is much more of a challenge than horizontally. But I think horizontal mounting produces much greater sonic's, and has greater WAF. Personally I prefer horzontal mounting in stereo applications whenever possible.

K_rose - maybe I'm missing something, but if you have reflections between two walls you should have amplification on even reflections 2, 4, 6 etc (in case of 5.25m it's 33Hz 66Hz 99Hz etc) and nulling (valleys) on odd reflections 1,3,5 etc. (frequencies in-between).

You should have the same amount of bass - only points of peaks and valleys will be different. It is possible that peak at 33Hz is useless (lowest bass E=44Hz, lowest piano A=27Hz but seldom used) and 49 Hz is suppressed giving you impression of weak bass (lack of extension). Damping room at low freqeuncies is not trivial and deep pattern foams are expensive and ugly.

You will get the strongest bass with speakers and listening spot at opposite walls.

The only speakers that don't do peaks and valleys are bipolar speakers (planar, electrostats) but they have modest bass to start with.

Try to toe in speakers at almost 45 deg angle - it will even up bass a little, will probably narrow the image but it will widen sweet spot. Room mode calculators are often very complex (3d plots) and might not be very helpful. Best bet to see what is happening would be to get good sound level meter and test CD.

Last night I tryed a test cd on 50hz on repeat and walk around the room, if this makes sense the sine wave was more noticable standing up than sitting down, clearer at the front and back, Sorry Kijanki, I have been missing the piont of what I have been doing for a while know,I will admit Iam struggle reading all the tecnical stuff with regards to the room hz and so forth, I like the old days when it did'nt matter when I was in my early teens and just love to listern to music!I like the idea of using my latex bed though, I will wait to Sunday when the other half is out and I will give it ago!who knows

K_rose -

343/5.25/2=32.66Hz where 343m/s is the speed of sound, 5.25m is the distance between your walls, 2 is because you need two times distance to amplify (from speaker to back wall + back to front wall + front wall to speaker = 2x distance between walls). Exact multiples of 32.66Hz will be multiplied as well since their wavelength is an even fraction.

Nulling is pretty much the same with odd divisions.

Kijanki, you are computing for 2 wall reflection....good start, and the most important.
How about 3 and 4 wall?