Primaluna prologue 2 based system upgrade


My modest first hifi system

Rega p3/24 ttpsu
Primaluna prologue 2 with built in phono and tube upgrade already.
Speakers MA RX6 + Basic Van Den Hul speaker cables.

Main concerns are the speakers, they dont disapear from the system, they are 6ohm and cant really find a sweet spot for these on the 4 or 8 ohm taps of the amp. Maybe something more tube friendly that will be a better match with the amp. I dont need lots of bass and the RX6 are a bit boomy to my taste, maybe its because the amp is just 40w...Better Imaging, something more suited for acoustic instruments and vocals just were the primaluna really shine!

Also will i get any benefit with power gear: wall outlets, power bar, power cord. Lots of people say its the first place to start while building a system but im a bit of an unbeliever and think its BS (no offense to anyone).

Also any advice on a decent sounding DAC, I just got back to vinyl and my record collection is a joke compared to whats on my hard drives...I think itll be handy to let the music flow through a playlist from time to time.

Thanks!
slapbackecho
I'm going to suggest something free. Go to the Cardas website. They have a speaker/room placement calculator which I found to be pretty effective. What was most unexpected is that the bass locked into the room better when I placed the speakers per cardas, which in my case meant pulling them a foot more into the room and away from the back wall. I also wound up bringing my speakers a bit closer together too.

As far as power options are concerned the single biggest impact I ever experienced was when I installed a dedicated 20 amp line to my system. It's a home run straight back to the breaker box, using 10 guage wire. Doing that cost less than a fancy power cord, and was more of an improvement than any power cord I've ever tried. For power distribution I use a simple wiremold power bar that Naim used to recommend, with the amp plugged direct to the wall. I think running the circuit cost about $150!

I'm all for free or low cost real improvements.
Donjr
If you replace the outlet you should replace your power cords.

Why? And how would anyone know which direction to go with a power cord?