2. amps-preamps
  3. 1278850802

Pass Labs:What to expect fm XA60.5 to XA100.5

Hi Guys,

Some of you may know that I have some buzz/hum issue in one of newly received XA60.5 mono blocks. The dealer diagnosed the problem and determined the transformer needs replacing. Since the XA60.5 is only few days old so I am given the chance to get a replacement set or I could top up the price difference to get the X350.5 or XA100.5s when my dealer gets their stocks in the next 3-4 weeks time.

Kudos to Pass Labs and the dealer's service for all the patience and after sales services...certainly very much appreciated and glad I go for Pass Labs.

As such, I have 3-4 weeks to listen to the current XA60.5 in my system while waiting for the stocks to arrive and make the final decision on the swap/upgrade.
elmerpoh
elmerpoh OP
12 posts
 
Hey Guys,

Just an update, finally my long wait for the XA100.5 ends 2 days ago.

Have it delivered, setup and running in my room.
Played for first 3 hours and already noticed the benefits of having more headroom even if its not required.

Cannot wait to run them in another 100hrs before giving further views against what i had previously experienced with the XA60.5.

Cheers
pubul57
3,712 posts
 
Congratulations!! Great amps with almost any speaker.
7p62mm
97 posts
 
I am curious as to which amp you chose. Assuming that your speakers have a 90dB efficiency rating. You would only need about 1 Watt/channel to drive them to around 80dB at 3 meters so the XA60.5 should provide all the power that you need. See the following link for power calculations:
(www.myhometheater.homestead.com/splcalculator.html)

The advantage to Class A is that there is no distortion due to cross over from A to AB operation so operating at low power output levels won't be an issue. A couple of advantages that the XA60.5 has over the XA100.5 is the 33% lower up front cost and the 33% lower power consumption (200W versus 300W).
peterayer
1,382 posts
 
Elmerpoh,
You never gave your impressions of the new amps. Do you still have them and how do they compare with the XA60.5?
rtn1
535 posts
 
My speakers are 90 db efficiency. My amplifier provides 400+ watts into 4 ohms. I use every one of those watts, every day. And not just for a couple seconds.
More to discover