2. amps-preamps
  3. 1142272499

What's best for Tannoy D-700s?

I finally have the opportunity to upgrade my system. I have been lugging around the extremely heavy Tannoy D-700s with me for years now, and have read that many audiophiles think they are guite good. I have not been happy with the sound I've gotten out of them, and suspect that this is due to not having the right amp, wiring and wall positioning.

So to all you marvelous audiophiles: please help me select an integrated amp, used or new, that would pair well with my Tannoys. Also, please let me know if it is really important to bi-wire them or do exotic things with their cross-overs.

I would like to spend less than $1500 on the amp (used). The ideal for me would be that the amp also supports 5 channel surround sound for a yet-to-be-purchased surround system, but I understand that in most cases, 5 or 7 channel amps in a range I can afford will not do both jobs well. So I'd also appreciate any advice as to whether having, for example, a 7 channel amp would work or if I should stick to 2 channel.

For those unfamiliar with the Tannoys, here are the specs from the manufacturer:

Nominal Impedance: 6 ohms
Minimum Impedance: 3 ohms
Sensitivity: 93dB/w
Frequency Response: 30Hz to 30KHz (=/- 3dB)
Maximum Input Power: 150watts
beranrose
william7
53 posts
 
Tannoy & tubes is a must hear. My Churchills love them .

Our M520 Integrated amp sounds lovely with the Tannoy's. I am the North American distributor for Eastern Electric so my opinion is biased but tubes & tannoys are the way to go.Whether it be our amp or somebody elses.
jaybo
4,478 posts
 
the D500's and D700's work well with any quality integrated. Audioclassics.com may have some suggestions, but on more than one occasion i have heard them paired with a bryston b60 and they were really dynamic. a creek or tandberg integrated would be a reliable choice as well
michaela
314 posts
 
Your D-700's are indeed quite good and if you're not getting great sound from them, it's not the fault of the speakers. The big Tannoy's do extremely well with tube amps and quality integrateds, but they will really open up with a high current ss amp that's at least 200 wpc. McIntosh and Tannoy are a classic combination, there is great synergy between the brands, but MAC gear might be out of your price range. Here's some suggestions that might be in your price range: Classe CA-200 or CA-201; Audio research 100.2; Audio research D400 Mk2; Gamut D-200; Plinius 9100 or 9200 (integrateds).

I think your D-700's will do better with the best 2 channel amp your budget will allow, rather than trying to get a 5 or 7 channel amp and stay in your budget, as you will again be making sonic sacrifices and again, not getting as much as you can out of the speakers. You'll just be in the same situation as you started with. You can always add a 3 channel amp later on for HT as your budget allows.

Good Luck to you,

Mike.
More to discover