Best set-up for up to 9k retail?

Marakanetz, I can only relate the comparisons that I am aware of. I have not compared to SPJ LaLuce. But the Teres 255 has been compared to the Clearaudio Master Reference on 2 occasions, and has beaten that on both occasions, in the ears of the listeners. It has been tested against Verdier La Platine and found to be about a tie on at least 2 different comparisons. On one comparison I know of, it was tested against a Walker Proscenium and was very close, and the Walker had a better cartridge. So by now I guess that it is apparent it is in a very high class of turntables. I am not saying that it is the very best, but I do say it is competitive with the very best, and costs far less, so I promote it as a very good value. If I were to guess, I'd say it will beat the SPJ LaLuce, because the SPJ has primarily acrylic construction. This is a problem and gives poorer detail and bass response compared to other materials. I found this out first hand when I had my Teres acrylic-base 135, and then upgraded to the wood/lead shot loaded 245 base. This may also be one reason why the Teres beats all the Clearaudio TTs. After hearing the difference between acrylic and other base materials, I cannot recommend acrylic bases. Again, I am not saying that Teres is the ultimate. I am saying that it is close enough to the ultimate so that you would never need to upgrade and it could be your last table. Especially since it is so reasonably priced. As far as arms on the Teres are concerned, it is very easy to use any type of arm on it. It has alot of adjustability for rotation and position of the armboard, and can accept any arm. Even ET-2.5 and other air bearing arms will work quite easily. There is no suspension, so sagging springs are not a problem when using heavy arms like the ET. In fact, it sounds real good with an ET-2.5. I use an OL Silver arm. Many are used with OL modded Rega 250. Graham is also popular with Teres owners. You can pick whatever you want, and it works great. I like the OL arms, but it would accept Kuzma arms just fine. No problem.

How long have you had the Nottingham? Your system post date is 2/3/03 and indicates that you are getting new equipmnet in two weeks. Is the analog setup new? I am curious because I am looking for an analog setup. Thanks!

Richardmr,
A very good friend of mine has a Volvare. You CAN NOT get a better table for the money. The Avid is incredible. I have heard Nottinghams, Regas, Clearaudio, Etc... The Volvare I heard had an SME 309 arm and a Audioquest cartridge which was modified by A.J Vanden hul. I can not comment on the Tri-planar arm, but I can only imagine. The Avid is one of the best tables out there regardless of price. Feel free to contact me if you have any further questions.

Kris

Go with nottingham Hyperspace or Dais/Anna Arm/Wave Mechanic PS and Lyra Helikon.

TWA,one day we may all rush and buy Teres tables;for now this is not going to happen.I like Gendut3's recommendation.
SME and Simon Yorke can be even better.Cartridge choice is a lot a matter of taste,you will have to try a few.Your downstream components will likely become inadequate after this upgrade.How far are you ready to go?Why not try Spacedeck/Spacearm if you generally like Nottingham and then think further?