2. analog
  3. 1318886751

Trouble with rega white belt seating properly

I just got the new white belt for my planar3 and that one along with my spare I never put on roll up and down and will not stay in place.My original belt is 10 years old and doesn't do this.I put in the subplatter upgrade a few years ago,I don't see that should be a problem,it wasn't with old belt.Does it need to breakin?Any ideas?
playpen
zmanastronomy's avatar
zmanastronomy
738 posts
 
I can see it rolling up OR down, but up and down has me puzzled.
stefanl
296 posts
 
It probably has to do with your motor being seated properly.You have to take off the belt loosen the screws on the plinth that are either side of the pulley.Then pull the motor down so the top of the pulley is centered and lower than the sub-platter.Tighten up the screws and put the belt back on.It should be fine now.
frank_sm
111 posts
 
I returned the first white belt I purchased due to the same problem. It is a manufacturing defect. Ask for an exchange.
achilles
135 posts
 
Mine worked fine right away (on my P3-24) and doesn't travel.
More to discover