Heavy table on Target vw1 'pro'?

I sould think as long as the wall mount is mounted correctly
{in wall studs with the proper size and length screws}there should be absolutely no problem handling a 50lb table.

Thanks, which 50 lb table have you had on it?

I have a very similar fear, but with the VW-2. I have a VPI Classic on the top shelf with a two inch maple shelf in between. I am going to guess that is 60lbs alone. On the lower shelf I have a Simaudio LP5.3 and a fairly light headphone amp. The VW-2 is rated for even less per shelf than the VW-1. Frankly, I don't fear that the arms of the shelf are going to simpy fold/collapse, but my fear is that the shelf could rip from the wall. Mine is anchored to wall studs on one side, but with drywall mollies on the other. The safe thing to do would be to fashion some sort of provisional props from the floor to within an inch or so of the bottom shelf arms to serve as a fail-safe, but it would look crappy. I think I will forgo asthetics though and do something soon. The thought of coming home one day and finding mass carnage is not something I can deal with.

Years ago, I owned the Target shelf and used it with my SOTA. I didn't have any problems, but when I moved I didn't keep the shelf.

About eighteen months ago, I got a new Target shelf and used six inch heavy lag screws into a 2" X 6" stud wall. I noticed that the newer Target shelf was designed differently than my old shelf. The metal also seemed to be a lighter weight.

I placed my Raven One TT on top of it which is also a heavy table, but I don't think it's heavier than the SOTA. The front of the shelf flexed downward, so the front was about 1/4" lower than the back. The shelf was not pulling away from the wall. The lower braces of the shelf looked like they were pushing into the back brace causing the problem. I have a picture to prove it.

I tried to compensate by shimming the bottom back of the wall brace. This worked initially, but over time the shelf continued to drop. That was scary.

They just don't make things like they used to...at least not this shelf. I had to abandon the shelf idea, and I'm glad I did.

Yeah, using drywall mollies on the one side would leave me more than a bit nervous too- better to come home today and do a rearrangement, fsonic. My bathroom scale says the SOTA checks in at 42 lbs without the arm, which would put it right at the limit - and that buckling story is even scarier. I think if I'm gonna do it, I might be safer to go custom. Thanks guys.