This is just a stab at the question: To set azimuth with my Signet, you first have to set the meter to 0 db for the channel that directly receives the signal from the test LP, so you can then measure the crosstalk in the opposite channel. When you do that in both directions, you have to have balanced the signal each time in that way in order to compare the crosstalk numbers (which are in terms of negative db, down from the 0 db reference). Perhaps that is what is going on with the Foz.
Azimuth and the Fozgometer
Finally received the Fozgometer after a 2 month backorder. In the past I have always used a loupe and a front surface mirror to set the azimuth on my Tri-Planar with Dynavector XV-1S cartridge. According to the meter, I was very close to a correct azimuth. I wasn't prepared for the effects that a very slight adjustment would make. Nailing the azimuth has brought my soundstage into tight focus. I have never experienced this kind of solid imaging in my system.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
- ...
- 68 posts total
- 68 posts total