i'm using the audioquest pt9, which is the same arm as the 250 straight-arm. using at the moment with a garrott bros k3, though my favorite mm with this arm is the AT150(which is a steal for the money). it is wired with silver, and is one of the best arms i've ever used. that includes any rega up to the 900, and helius orion. a solid value.
Jelco Tone Arms 9 and 12 inch
I would love to find out how many if any are using this tone arm. Let me know the following:
1. Which length arm you are using?
2. What turntable you use the arm on?
3. What cartridge are you using with the most success?
4. Have you noticed any bearing or other problems?
5. What about their tone arm cables, which to buy?
I understand this company has made tone arms for a number of other high end turntable manufacturers with great success. If there are no major or other problems the Jelco tone arms look like a great buy.
I would very much appreciate any and all information and suggestions from forum members. The motor burned out of my old Cranfield Rock Turntable. The motor that lifts and lowers the Excalibur tone arm also malfunctioned. By the way my Excalibur arm is a very old model and not worth trying to save. I had thought about getting it rewired but decided after speaking with a rewire expert that it would be best to purchase a newer tone arm. So rather than try to get all of this repaired I am going to use the platter and bearing and build a new heavier plinth. I have already ordered a stand-a-lone motor for this project. I was thinking about using a 12 inch tone arm. A friend told me about the Jelco's which I had never heard of. They look interesting and they look like a quality product. I look forward to all your comments and suggestions.
1. Which length arm you are using?
2. What turntable you use the arm on?
3. What cartridge are you using with the most success?
4. Have you noticed any bearing or other problems?
5. What about their tone arm cables, which to buy?
I understand this company has made tone arms for a number of other high end turntable manufacturers with great success. If there are no major or other problems the Jelco tone arms look like a great buy.
I would very much appreciate any and all information and suggestions from forum members. The motor burned out of my old Cranfield Rock Turntable. The motor that lifts and lowers the Excalibur tone arm also malfunctioned. By the way my Excalibur arm is a very old model and not worth trying to save. I had thought about getting it rewired but decided after speaking with a rewire expert that it would be best to purchase a newer tone arm. So rather than try to get all of this repaired I am going to use the platter and bearing and build a new heavier plinth. I have already ordered a stand-a-lone motor for this project. I was thinking about using a 12 inch tone arm. A friend told me about the Jelco's which I had never heard of. They look interesting and they look like a quality product. I look forward to all your comments and suggestions.
- ...
- 15 posts total
- 15 posts total